Glem GHI9100BK Mode D'emploi page 65

OPERATION
There are five buttons:
above.
1. Power on: After connecting to power, indicator light will lit on, all the output close and the
hood will enter standby mode. The indicator light will be off automatically after reminding
if no operation.
2. Power button :
2.1 Press power button
Indicator light of low speed
indicator light will be off. All the function operation of the hood will be closed, the hood enters
into standby mode. The above steps can be operated repeatedly.
2.2 The speed buttons and lamp button can work separately and not controlled by the power
button. When a certain function button is pressed, the hood operates at that function status.
Press power button under any status, the cooker hood will be switched off without any
functions.
3. Lamp button :
Press lamp button
button will lit on. Press lamp button
button and power button
4. Speed button:
4.1 Press the (High) button once, motor runs at high speed, the indicator light of high
button and power button
stop. Indicator light of high button and power button will be off. The above steps can be
operated repeatedly.
4.2 Press the (Mid) button once, motor runs at middle speed, the indicator light of middle
button and power button
stop. Indicator light of middle button and power button will be off. The above steps can be
operated repeatedly.
4.3 Press the (low) button once, motor runs at low speed, the indicator light of low button
(Low), (Mid),
once, its indicator light will lit on, the hood works at low speed.
will be bright. Press power button again to close it, and its
once; lights will be turn on. Indicator light of lamp button
again to turn off the lights. Indicator light of lamp
will be off. The above steps can be operated repeatedly.
(High), (Mid), (Low)
will beam. Press high button
will beam. Press middle button
(High), (Lamp),
65
(Power). See picture
and power
again and the motor will
again and the motor will