C6 Audio Or Video Call; C7 Configure Services - Comelit 1998NV Manuel Technique

C6 Audio or video call

Audio call by default.
Activating video calling will allow you to make a
video call to an internal unit. The monitor called by
the switchboard will switch on, making it possible
to view, for example, the images from the remote
cameras connected to Art. 1259/A or to Art. 1259C.
When backwards compatibility is disabled - by
default (see C5 - Backwards compatibility), when the
internal unit receives a call from the switchboard, the
video comes on immediately.
When backwards compatibility is enabled, when
the internal unit receives a call from the switchboard,
the video comes on when communication begins.
To activate audio or video calling:
- press MENU and use the
Configurations menu, then press OK;
• Settings
• Configurations
• Namedir
• Incoming call
• Alarms
- use the keys to view the System menu, then
press OK;
• System
• Services
- use the keys to view the A/V menu, then
press OK;
System Simplebus
Link Single
Call Indirect
A/V Audio
Back com.
Esc
- select Audio or Video using the
- press OK to confirm the settings;
- press ESC repeatedly to return to the main screen.
keys to view the
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
Ok
keys.

C7 Configure services

FollowMe:
Function cannot be used
Call repetition:
Timed contact closure between 1 and 30 seconds
can be selected (see "I8 - Adjust timing").
Self Activation:
This is disabled by default.
CAUTION!
This function is only available for non-TOP
Simplebus systems and requires Art. 1259 for the
cyclic displaying of images from remote cameras.
This function can be used to activate or deactivate
the self activation transmitted by the internal units
with the switchboard in DAY mode.
Triple call:
This is disabled by default.
This function can be used to activate or deactivate
the triple call made by the switchboard to the internal
units.
The call will therefore take place on 3 consecutive
occasions (in the case of video calls: the first 2 will
be audio calls and the third will be a video call).
Help code:
This is disabled by default.
It is used to expand the Simplebus codes on the
riser line.
To activate the services:
- press MENU and use the
Configurations menu, then press OK;
• Settings
• Configurations
• Namedir
• Incoming call
• Alarms
- use the keys to view the Services menu, then
press OK;
• System
• Services
keys to view the
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
65