Comelit 1998NV Manuel Technique page 35

Warning
• This Comelit product has been designed and manufactured for use in the creation of audio and video communication systems in residential, commercial,
industrial and public buildings.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the
indications provided in the manuals / instruction sheets supplied with those products.
• Disconnect the power supply before carrying out any operations on the wiring.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as power cables (230V or higher).
• To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets; make sure the system created
using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in
the manuals /instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A.; for the systems, by
qualified technical personnel.
• Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in
this manual / instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual / instruction sheet at any time
and without prior notice.
Table of contents
Description .................................................. 37
Device (see page 36) ........................................................ 37
Keypad .............................................................................. 37
Alphanumeric keypad ...................................................... 37
Connections ................................................ 38
Description of terminal block.......................................... 38
Technical specifications ............................ 39
Interface and navigation mode ................. 40
Description of the interface ............................................ 40
System status ........................................................................................ 40
Alerts ..................................................................................................... 40
Menu navigation ............................................................... 40
Use ............................................................... 41
U1 How to answer a call from an internal unit ...................................... 41
U2 How to answer a call from an external unit...................................... 41
U3 How to call an internal unit .............................................................. 42
U4 How to transfer a call from the external unit to an internal unit ....... 43
U5 How to set up communication between 2 users (intercom function) .. 43
U6 How to call an internal unit listed in the incoming call log ............... 44
U7 How to call a secondary switchboard from a main switchboard .... 45
U8 How to call a main switchboard from a secondary switchboard .... 46
U9 How to answer a call made from the secondary switchboard to the main
switchboard ..................................................................................... 46
U10 How to answer a call made from the main switchboard to the secondary
switchboard .................................................................................... 46
U11 How to activate or deactivate the main switchboards .................. 47
U12 How to use the lock-release .......................................................... 47
U13 How to activate an additional relay .............................................. 48
Name directory ........................................... 49
U14 How to use the name directory...................................................... 49
U15 How to find a name in the directory............................................... 49
U16 How to enter a name in the directory ............................................ 49
U17 How to delete a name in the directory ........................................... 50
U18 How to edit a name in the directory............................................... 51
U19 Delete directory .............................................................................. 51
U20 Directory info ................................................................................. 52
U21 Recording fast numbers ................................................................ 52
Incoming call ............................................... 53
U22 View incoming calls ...................................................................... 53
U23 Delete incoming calls list .............................................................. 53
Alarms ......................................................... 54
U24 View alarms ................................................................................... 54
U25 Delete alarms received list ............................................................. 54
Settings ....................................................... 55
I1 Change language .............................................................................. 56
I2 Video settings .................................................................................... 56
I3 Audio settings .................................................................................... 57
I4 Sounds settings ................................................................................. 57
I5 Change date ...................................................................................... 58
I6 Change time ...................................................................................... 58
I7 Themes settings ................................................................................ 59
I8 Adjust timing...................................................................................... 59
I9 Set day mode .................................................................................... 60
I10 Set auto commutation ..................................................................... 60
I11 Reset settings .................................................................................. 61
Installer configurations .............................. 62
C1 Type of switchboard (Simplebus Top mode) ................................... 62
C2 How to configure a main or secondary switchboard ....................... 63
C3 How to configure a switchboard as single, parallel or series .......... 63
C4 Call via Simplebus or indirect code ................................................. 64
C5 Backwards compatibility ................................................................. 64
C6 Audio or video call .......................................................................... 65
C7 Configure services ........................................................................... 65
Wiring diagrams.......................................... 99
35