U3 How To Call An Internal Unit - Comelit 1998NV Manuel Technique

Door open
- to end the conversation, hang up the handset.
End of communication
- to reject the call, press
CAUTION!
In NIGHT mode (see "I9 - Set Day mode"),
calls from the external unit addressed to an
internal unit appear on the display, but cannot be
intercepted from the switchboard.

U3 How to call an internal unit

The switchboard can use 3 different methods to call
an internal unit:
- enter the user number* and press
*The number entered depends on the switchboard
configuration, see "C4 - Call via Simplebus or
indirect code"; contact your usual installer.
User:
To call
- press and scroll through the name directory
using the until the desired name is displayed,
then press .
42
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
.
.
14 :15 : 26
Mon 12 Mar 20
002
______________________
John Smith
Code 012
Scroll
- press the corresponding fast number (e.g. fast
number 1= stored code "002", see "U21 Recording
fast numbers").
- if the call has taken place correctly:
Called user John Smith
- if the call has not taken place correctly:
User not available
- if the user is busy:
Line busy
When the user receiving the call is connected
to the audio line, it begins communicating
with the switchboard;
conversation time equal to the audio time set
on the main switchboard (MENU/Settings/Timing/
Communication - min. 10 seconds, max. 90
seconds).
14:15:26
Mon 12 Mar 20
Menu
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
with a maximum