U8 How To Call A Main Switchboard From A Secondary Switchboard; U9 How To Answer A Call Made From The Secondary Switchboard To The Main; Switchboard; U10 How To Answer A Call Made From The Main Switchboard To The Secondary Switchboard - Comelit 1998NV Manuel Technique

U8 How to call a main switchboard from a
secondary switchboard
To call a main switchboard from a secondary
switchboard, press .
When the main switchboard receiving the call
has its handset lifted, it begins communicating
with the secondary switchboard, with a maximum
conversation time equal to audio time set on the
main

switchboard

(MENU/Settings/Timing/
Communication- min. 10 seconds, max. 90
seconds).
In communication with
005 240
- to end the conversation, hang up the handset.
CAUTION!
When the secondary switchboard and main
switchboard are communicating with each other,
calls cannot be transferred or put on hold.
U9 How to answer a call made from the secondary
switchboard to the main switchboard
When the main switchboard receives a call from the
secondary switchboard:
- the NAME of the secondary switchboard from
which the call is being made, (if it is listed in the
directory, see "U16 How to enter a name in the
directory") , or the address of the switchboard
making the call (e.g. 005 240) is displayed.
Call from 005 240
005= indicates the "zone"
240= indicates the general ID of the switchboard
- to reject the call, press
46
14:15:26
Mon 12 Mar 20
14:15:26
Mon 12 Mar 20
;
- to answer the call originating from the secondary
switchboard, lift the handset;
- the main switchboard communicates with
the secondary switchboard, with a maximum
conversation time equal to the audio time set on
the main switchboard (MENU/Settings/Timing/
Communication - min. 10 seconds, max. 90
seconds);
In communication with
005 240
- to end the conversation, hang up the handset.
CAUTION!
If the switchboard is busy or the Switchboard
operator is momentarily absent and cannot
answer within 30 seconds, it will be added to the
incoming call log (see "U6 How to call an internal
unit listed in the incoming call log").
U10 How to answer a call made from the main
switchboard to the secondary switchboard
When the secondary switchboard receives a call
from the main switchboard:
Call to CPS
- to answer the call originating from the main
switchboard, lift the handset;
- to end the conversation, hang up the handset.
14:15:26
Mon 12 Mar 20
14:15:26
Mon 12 Mar 20