Snapper SXD19SSWM82 Manuel D'utilisation page 15

ASSEMBLY
INSTALLING THE GRASS CATCHER BAG (See Figure 5)
• Lift the rear cover (1).
• Lift the grass catcher (4) by its handle (2) and place under the rear cover
so that the hooks (3) on the grass catcher are seated on the door rod (5).
• Release the rear cover. When installed correctly, the hooks on the grass
catcher will extend through the openings on the rear cover.
NOTE: When using the grass catcher, do not install either the side discharge
deflector or the mulching plug.
(3)
(2)
(1)
(5)
(4)
15
(3)
Fig. 5