Snapper SXD19SSWM82 Manuel D'utilisation page 14

ASSEMBLY
REMOVING/INSTALLING THE MULCHING PLUG (See Figure 4)
• To remove the mulching plug, lift the rear cover (1).
• Grasp the handle (2) of the mulching plug. Lift and pull the mulching plug
out using the handle.
• The mulching plug (3) is inserted at an angle, so it requires some force to
remove it.
• The mulching plug must be removed in order to install the grass catcher
bag.
• The mulching plug must be re-installed when the grass catcher bag is
removed.
(2)
(3)
14
(1)
Fig. 4