Automatic Radio Finding Of Tbos Control Modules; Receiving A Program From The Control Module Via Radio - Rain Bird TBOS Serie Manuel D'utilisation

4. Automatic Radio finding of TBOS Control Modules

This is an essential step for communicating by radio with all TBOS-II
TBOS-II™ Control Module. This search will automatically detect all nearby TBOS™ control modules; up to a limit of 32
products (the first 32 control modules detected will be listed).
- Press HOME key for 2 seconds to switch on the field transmitter and
display the welcome menu.
- Press OK, select "TBOS Radio" using the OFF key and confirm by
pressing OK.
- Then, in the TBOS Radio menu, select "TBOS finding".
- The "Finding... " screen will be displayed for a minimum of 25 to
60 seconds according to the number of TBOS modules detected.
- Once TBOS™ module detection is completed the "TBOS list"
screen is displayed, with the characteristics of each module:
. TBOS module name (max. 12 characters)
. The battery charge level icon of the TBOS-II module (0 to 3
bars) or the TBOS module (low battery - or no icon if the
battery charge level is OK).
. TBOS-II™ Radio Adaptor battery charge level icon (0 to 3 bars)
. Radio reception level between TBOS-II™ Field Transmitter and
Radio Adaptor.

The list resulting from a TBOS Finding command is saved and can be used later on, using the "TBOS List"
Menu on the Field Transmitter screen.

5. Receiving a program from the Control Module via radio

- Select "TBOS list" from the TBOS™" Radio welcome menu and confirm by pressing OK.
- Once the list of TBOS™ modules is displayed on the screen, select the chosen module using the OFF key and
confirm by pressing OK.
- A radio reception "Receiving..." message is displayed, followed by a summary of the TBOS™ module program.
Radio Adaptors mounted on a TBOS™ or
TM
ENG
27