Programming Tbos-Ii™ Field Transmitter - Rain Bird TBOS Serie Manuel D'utilisation

ENG
The field transmitter can also add the "Rain Delay" function to all TBOS™ control modules.
It has 6 memory storage areas that can store 6 different programs: 3 are dedicated to old model TBOS™ modules
and the 3 others to the TBOS-II™ modules. It also allows to cancel all or individual programs contained in any
TBOS™ module (TBOS™ module reset).
1. Programming TBOS-II

Before programming process, you MUST connect the field transmitter infra red cord on the TBOS
TBOS-II Control Module Infra red connector.
TM
- To wake-up the Field Transmitter, press HOME during 2 sec.
- Press the OK key, select "TBOS IR infrared" with  and confirm by pressing OK in
order to read the program data contained in your TBOS™ Control Module. The reading
of program data can take between 2 and 12 seconds according to the TBOS™ module
version (old or new).
The first infrared welcome screen indicates the status of the various external items
(TBOS™ module sensor or battery), ON/OFF state, of the Water budget or the watering
operation in progress (TBOS-II™ only).
Creating Irrigation Schedules – Watering Days:
The field transmitter contains 3 independent programs (A/B and C). Separate watering
days, start times and watering run times can be set for each program.
Note: a station can be assigned to only one program, either A, B or C in the case of an
old generation TBOS™ field transmitter, but to one or more programs in the case of the
TBOS-II field transmitter.
Then, select "Programs" in the Infrared welcome screen, and confirm by pressing OK.
- Select "Watering days" and confirm by pressing OK.
You can then choose a specific watering cycle:
- Week (custom cycle) - All days set to ON by default
- Even-numbered days
- Odd-numbered days
- Odd numbered days 31 (watering performed on odd days except the 31)
- Cyclical (every " X" days)
16
Field Transmitter
TM
/
TM