On/Off & Rain Delay; General Program Saving In Tbos-Ii Field Transmitter - Rain Bird TBOS Serie Manuel D'utilisation

ENG
- Then, set the watering test run time (1 to 10 min) using the ON/OFF keys, and confirm by pressing OK to
transmit the program data to the control module.
5. ON/OFF & Rain Delay
The TBOS-II universal filed transmitter has an "OFF" function that allows you to disable watering (e.g. when it rains)
regardless of programming. To re-enable watering, the default position is "ON".
- Select "ON/OFF" from the Welcome menu and confirm by pressing OK.
- Then, select the time during which you wish to stop the program (1 to 14
days or complete shut-down) and confirm by pressing OK.
The data will then be immediately transmitted to the TBOS™ and is totally independent of the programming.

If you select the "OFF" option, watering will be automatically stopped until switched back on.
To restart, perform the same steps as above and select the "ON" option.
6. General Program Saving in TBOS-II
The new TBOS-II™ universal field transmitter contains an internal memory that can store up to 3 different programs
(irrigation + names). You can, for example, create 3 different programs covering specific seasons (Spring/ Summer/
Autumn) and save them in the field transmitter. This action allows you to save time, as they can be transmitted by a
simple click to other TBO/TBOS-II
- Select "Program templates" from the TBOS™ IR welcome screen and
confirm by pressing OK.
- Then, choose between two options: "Save" the data in the field
transmitter or "Restore" the data.

The "Restore" function allows you to delete all data contained in the field transmitter except for the time
and the date. "Restore" replaces the program displayed on the field transmitter.
A transmission must then be made to the control module.
22
Field Transmitter
TM
Control Modules.
TM