D - Using The Field Transmitter Via Infra Red - Rain Bird TBOS Serie Manuel D'utilisation

You can therefore:
- Create an irrigation program (calendar, start times, irrigation run times)
- Configure monthly seasonal adjustment or using a program (Water Budget)
- Check a program
- Delete a program
You can use the "Save" function to save the program you have just created to one of the three memories of your TBOS-II Field
Transmitter.
You can use the "Restore" function to redisplay the program from one of the three memories (saved previously) in the
TBOS-II transmitter. Once connected to a TBOS-II Controller or Radio Adaptor Unit, you can transmit the program to it.

Tip : This function is also available via your controller's working screen (once connected via infrared or radio)
with the name "Program templates".
NB: The function that may be accessed offline can be used to save TBOS-II programs only (i.e. TBOS-II controllers or TBOS-II
Radio Interface Unit). An equivalent function for TBOS controllers may be accessed when you are connected via infrared to a
first generation TBOS controller (but it is not available offline).
D – USING THE FIELD TRANSMITTER VIA INFRA RED CONNECTION (IR)
The field transmitter is able to communicate via infrared with all types of old or new generation TBOS™ control modules.
Certain exclusive functions are only accessible when the field transmitter is connected to a TBOS-II™ IR control module, i.e.:
- Water budget,
- Assignment of a station to several programs, each with a different time,
- Station test,
- 1 to 31 day cyclical irrigation schedules (1 to 6 days for the TBOS™ model),
- Customisation of TBOS-II module and its stations names,
- Saving of program in the control module.
ENG
15