Connections; Connecting And Linking The Power Supply - dB Technologies VIO S118R Caractéristiques Techniques

English

4. CONNECTIONS

CONNECTING AND LINKING THE POWER SUPPLY

The illustration above shows an example of a generic connection in which subwoofer 1
is underneath subwoofer 2. Use cables with powerCON TRUE1® connectors (only one power cable is
provided in the package).
• Connect the AUTO-RANGE MAINS INPUT (A) power supply on subwoofer 1.
• Link the power supply from subwoofer 1 to subwoofer 2 by connecting the MAINS LINK (B) output
on subwoofer 1 to the AUTO-RANGE MAINS INPUT (C) input on subwoofer 2 (link cable not
provided).
• Repeat this step to connect up to the maximum allowed number of subwoofers (see the
SPECIFICATIONS
CAUTION
•
VIO-S118R
C
A
chapter).
!
The cables must be suitably dimensioned, and only qualified personnel may design,
install and check the system. AEB industriale declines all liability if unsuitable or
uncertified cables are used, or if they are not dimensioned correctly for the system
and in accordance with the regulations in force in the country of use.
B
SUBWOOFER 2
SUBWOOFER 1
TECHNICAL
Cod. 420120271 REV. 1.0
41