Installation - Vortice VORT HR 350 AVEL Livret D'instructions

ENGLISH

Installation

N.B. The appliance is not suitable for outdoor installation. The appliance must be installed in accordance with current
safety regulations in the destination country, and with the instructions in this booklet. The appliance must be installed on
an internal surface or wall of the home structurally suited to holding its weight (max. 30 kg). The appliance cannot be
positioned and secured in place using only adhesives. The connection of the ventilation ducts to the appliance must be
made with the aid of a tool.
Mounting
The appliance can be floor-standing or wall-mounted.
Floor
N.B. if opting for floor-standing installation, leave enough room underneath the appliance to create the siphon traps on
the condensate drain outlets (see also Condensate Drain paragraph). The appliance can be placed or secured using the
fixing systems supplied by Vortice (optional) (Vortice recommended method) (see figure sequence 3, 4, 5).
3 3
5 5
Wall
We recommend using the bracket provided by Vortice (Fig.6, 7, 8).
6 6
4 4
7 7
17