CHAFFOTEAUX EXPERT CONTROL Mode D'emploi page 86

technical area
GB
- Fan test
Press the OK button to confi rm.
Press the back button "
the previous screen.
Turn the knob and select:
- Assistance options
(this mode can be used to store the ser-
vice centre data and servicing indica-
tions)
Press the OK button.
Turn the knob and scroll through the pa-
rameters to be set:
- Service centre data
- Enable servicing indications
- Reset servicing indications
- Months remaining until service
Press the OK button to confi rm.
Press the back button "
the previous screen.
Turn the knob and select:
- MAINTENANCE
(if necessary, check or confi gure some
essential parameters for correct boiler
operation)
Press the OK button.
Turn the knob and select:
- Solar Control (where present)
(follow the instructions provided in the
solar documentation)
- Boiler
Turn the knob and select:
- Boiler
Press the OK button.
Turn the knob and select:
- Parameters
Press the OK button.
Turn the knob and scroll through the pa-
rameters:
- Gas parameters
- Display options
- Boiler P.C.B. change
86
Press the OK button to confi rm.
Press the back button "
" to return to the previous screen.
Turn the knob and select:
- ERRORS
Press the OK button.
Turn the knob and select:
- Solar Control (where present)
(follow the instructions provided in the
solar documentation)
- Multizone control (where present)
- Boiler
Press the OK button.
Turn the knob and select:
- Boiler
Press the OK button.
Turn the knob to scroll on the display the
" to return to
last 10 errors recorded.
" to return to