Using The Radio For The First Time - Sangean DDR-36 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Using the radio for the first time

1. Place your radio on a flat surface.
. Fully extend the telescopic aerial located on the rear of your radio.
. Insert the adaptor plug into the DC socket located on the rear of your radio. Plug the adaptor
into a standard mains outlet. The display will show "Welcome to Digital Radio" for a few seconds.
After s short time, the current time will appear on the display.
4. If no stations are found, "0:00" will be displayed. Press the Standby button to turn on your radio
and it will find a DAB clock radio stations. It may be necessary to relocate your radio to a
position giving better reception and carry out a scan to find stations as described in later
sections.
IMPORTANT:
The mains adaptor is used as the means of connecting the radio to the mains supply. The mains
socket used for the radio must remain accessible during normal use. In order to disconnect the
radio from the mains completely, the mains adaptor should be removed from the mains outlet
completely.
Welcome to
Digital Radio
GB
6

Publicité

Table des Matières
loading

Table des Matières