Sangean DDR-36 Mode D'emploi page 37

Set up my EQ profile
If you find the preset equalizer functions not to your liking, you may set up a custom treble and
bass as following:
. Follow step- in the EQ function section in order to enter EQ menu.
. Rotate the Tuning control until 'My EQ' is highlighted on the display. Press the Select button to
enter the adjustment mode.
. Rotate the Tuning control to adjust the treble level (between -5 and +5). The sound will change
as you adjust the level. Press the Select button to confirm the setting. The display will then
revert to My EQ menu.
4. Rotate the Tuning control until 'bass' is highlighted on the display. Press the Select button to
enter the adjustment setting. Rotate the Tuning control until the desired level (between -5 and
+5) is displayed. The sound will change as you adjust the level. Press the Select button to
confirm the setting.
Note:
To quickly cancel the effect of My EQ profile, rotate the Tuning control until 'Normal' is highlighted
on the display and press the Select button. The treble and bass settings will be memorized for
the next time that you wish to use the My EQ.
Equaliser
< My EQ...
My EQ...
< Treble
Treble
< +3
My EQ...
< Bass
Bass
< +3
GB
>
>
>
>
>
6