Sleep Function - Sangean DDR-36 Mode D'emploi

Sleep function

Your radio can be set to turn off after a preset time has elapsed. The sleep setting can be
adjusted between 5 and 90 minutes. Ensure your radio is switched on.
. To set the desired sleep time, press and release the Sleep button to enter the sleep setup.
. Repeatedly press and release the Sleep button to select the desired sleep time. The sleep
settings available are 5, 0, 45, 60 or 90 minutes. A further press will cause the sleep timer to
be set to 'off' which will cancel the sleep function. Alternatively the Tuning control may be used.
3. Press the Select button to confirm the setting. The display will exit the sleep options. The sleep
symbol 'S' will show on the display.
4. Your radio will switch off after the preset sleep time has elapsed.
5. To cancel the sleep timer and switch off your radio before the chosen sleep time has elapsed,
press the Standby button. To cancel the sleep timer without switching off your radio, repeatedly
press the Sleep button until ' Sleep off' is displayed.
6. When the sleep time has been set you may view the remaining sleep time. Press the Sleep
button. The remaining sleep time will show on the display.
9
Set sleep time
15 minutes
Set sleep time
30 minutes
Set sleep time
Sleep off
99.75 MHz
[No RadioText]
S