Manual Tuning - Dab; Manual Tune; Signal Strength Display - Dab - Sangean DDR-36 Mode D'emploi

Manual tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB frequency in Band III. Any
new stations found will be added to the station list. This function can also be used to assist the
positioning of the aerial or the radio to optimize reception for a specific channel or frequency.
. Press the Menu button until the Advanced DAB menu shows on the display and then release
the button.
. Rotate the Tuning control until the display shows 'Manual Tune'.
. Press and release the Select button to enter the manual tuning mode.
4. Rotate the Tuning control to select the desired DAB channel.
5. Press and release the Select button. The open block in the signal strength graph shows the
minimum signal strength needed for good DAB reception. The signal blocks will go up and
down showing the changing signal strength as you adjust the telescopic aerial or the radio
position. Any new radio stations found on the tuned DAB multiplex will be added to the list
stored in the radio.
6. Press and release the Select button to return to normal tuning mode.

Signal strength display - DAB

. Press and release the Menu button until the display shows signal strength. The open block in
the signal strength graph shows the minimum signal strength needed for good DAB reception.
The signal blocks will go up and down showing the changing signal strength as you adjust the
aerial or the radio position.

DAB
<Manual Tune

Manual Tune

<12B 225.648MHz
12B 225.648MHz BBC
BBC Radio 2
>
>