Listening To Bluetooth Music; Pairing Your Bluetooth Device For The First Time - Sangean DDR-36 Mode D'emploi

Listening to Bluetooth music

You need to pair your Bluetooth device with your radio before you can auto-link to play/ stream
Bluetooth music through your DDR-6. Paring creates a `bond' so two devices can recognize
each other.

Pairing your Bluetooth device for the first time

. Press the Mode button until the Bluetooth mode is selected. The Bluetooth icon on the panel
will flash.
. Activate Bluetooth on your device according to the device's user manual to link to your DDR-6.
. Once connected, the Bluetooth icon will remain illuminated. You can now play the music in your
Bluetooth-enabled device via DDR-6.
4. Make sure to turn down the volume from your Bluetooth device.
Note:
) If there are  Bluetooth devices searching for DDR-6, it will show its availability on both devices.
However, if one device links with the DDR-36 first, then the other Bluetooth device won't find
the DDR-6 on its list.
) If your Bluetooth-enabled device is temporarily disconnected to your DDR-6. As long as the
disconnection last within  minutes, your device can re-connect with your radio again
automatically. If the disconnection last more than  minutes, then you need to manually
reconnect your device again to the radio. Be aware that during the period of disconnection, no
other Bluetooth device can pair or link with your radio.

Blutooth