Sangean DDR-36 Mode D'emploi page 27

5. Rotate the Tuning control to select the correct day and then press the Select button to
confirm the setting.
6. Rotate the Tuning control to select the correct month and then press the Select button to
confirm the setting.
7. Rotate the Tuning control to select the correct year and then press the Select button to
confirm the setting.
8. Rotate the Tuning control to choose the desired volume and press the Select button to
confirm the setting. Your radio will show 'Alarm Saved' and will exit the alarm setting
procedure.
Note:
) Active alarms are indicated in the display by the alarm 'A' symbol. If the radio cannot connect
to the radio station, the buzzer alarm will be used instead. The alarm volume will start softly
and gradually increase in level every few seconds. The alarm will sound for the selected
duration unless cancelled.
) when you are in Bluetooth, you can only use remote control to set the alarm.
Alarm 1 Wizard
Date 9-1-2013
Alarm 1 Wizard
Date 9-1-2013
Alarm 1 Wizard
Date 9-1-2013
Alarm
Saved
A
GB
6