Advanced Settings; Network Setting; Firmware Update - Pioneer N-30AE Manuel D'instructions

> Before Start > Part Names

Advanced Settings

Advanced Setup
1
20
> Install > Initial Setup > Playback
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Press SETUP on the remote controller.
Setup

Network Setting

Option Setting
System Info
Factory Reset
2. After the Setup screen is displayed, select the content or the setting with the cursors on
the remote controller and press ENTER to confirm your selection. To return to the
previous screen, press RETURN.
3. To exit the settings, press SETUP.
Network Setting
∫ Connection
Select the type connection to the network.
"Wi-Fi": To connect via wireless LAN
"Wired" (Default Value): To connect via wired LAN
Perform "Wi-Fi Setup" if you select "Wi-Fi".
∫ Wi-Fi Setup
Make Wi-Fi connection settings. ( P10)
This can be set only when "Wi-Fi" is selected in "Connection".
| Firmware Update | Others
Advanced Setup
E
N