Publicité
Les langues disponibles
Les langues disponibles
> Before Start
> Part Names
System Setup
Advanced Setup
1
2
44
> Install
INPUT
> Initial Setup
> Playback
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Switch the input on the TV to that assigned to the unit.
2. Press
on the remote controller to display the Home screen.
3. With the cursors on the remote controller, select "System Setup", and then press ENTER.
4. Select the item with
your selection.
0 Change the initial values for each of the settings with the cursors /
0 To return to the previous screen, press
5. To exit the settings, press
Input/Output Assign
∫ TV Out / OSD
1080p -> 4K Upscaling When using a TV that supports 4K, video signals input at 1080p
Super Resolution
OSD Language
Advanced Setup
| Supplementary Information | Others
/
/ /
on the remote controller and press ENTER to confirm
.
.
can be automatically upscaled to 4K for output.
"Off (default value)": When this function is not to be used
"Auto": When this function is to be used
0 Select "Off" if your TV does not support 4K.
When you have set "1080p -> 4K Upscaling" to "Auto", you can
select the degree of video signal correction from "Off" and
between "1" (weak) and "3" (strong).
Select the on-screen display language.
(North American models) English, German, French, Spanish,
Italian, Dutch, Swedish
(European, Australian and Asian models) English, German,
French, Spanish, Italian, Dutch, Swedish, Russian, Chinese
.
Publicité
Chapitres
Dépannage
