Publicité
Les langues disponibles
Les langues disponibles
> Before Start
> Part Names
Web Setup
You can make the settings for network features for this unit in an internet browser on a PC,
smartphone, etc.
1. Press
on the remote controller to display the Home screen.
2. Select "Network/Bluetooth" - "Network" with the cursors, then take a note of the IP
address displayed in "IP Address".
3. Start the internet browser on your PC or smartphone and enter the IP address of the unit
in the URL field.
4. Information for the unit (Web Setup screen) is displayed in the internet browser.
5. After changing the settings, select "Save" to save the settings.
Device Information
You can change the Friendly Name, set an AirPlay Password, etc.
Control4: Register this unit if you are using a Control4 system.
Firmware Update: Select the firmware update you have downloaded to your PC so you can
update this unit.
Network Setting
Status: You can see information for the network such as the MAC address and IP address
for this unit.
Network Connection: You can select how to connect to the network. If you select "Wireless",
select an access point from "Wi-Fi Setup" to connect.
DHCP: You can change DHCP settings. If "Off" is selected, you must set "IP Address",
"Subnet Mask", "Gateway", and "DNS Server" manually.
Proxy: Displays/Sets the proxy server URL.
> Install
> Initial Setup
> Playback
Advanced Setup
| Supplementary Information | Others
63
En
Publicité
Chapitres
Dépannage
