Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38

Liens rapides

N-70AE
N-50AE
Language select / Sélection de la langue / Selección de idioma / Selezione lingua /
Sprachauswahl / Taal selecteren / Välj språk
English
Italiano
Svenska
Français
Deutsch
Español
Nederlands

Publicité

Table des Matières
loading

Sommaire des Matières pour Pioneer N-70AE

  • Page 1 N-70AE N-50AE Language select / Sélection de la langue / Selección de idioma / Selezione lingua / Sprachauswahl / Taal selecteren / Välj språk English Français Español Italiano Deutsch Nederlands Svenska...
  • Page 2: Table Des Matières

    Supplementary information | Advanced Setup | Others Before Start What's in the box ..............2 NETWORK AUDIO PLAYER Part Names N-70AE Front Panel (N-70AE) ............. 3 Front Panel (N-50AE) ............. 4 Rear Panel (N-70AE) .............. 5 Rear Panel (N-50AE) .............. 6 Remote Controller ..............7 N-50AE Display ..................
  • Page 3: Before Start

    Before Start ≥ N-70AE only Wireless antenna (2) Main unit (1) (N-70AE is used in the illustrations) 0 Quick Start Guide (1) 0 This document is an online instruction manual. It is not included as an accessory. 0 The power cord must be connected only after all other cable connections are completed.
  • Page 4: Front Panel (N-70Ae)

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Front Panel (N-70AE) Part Names             1. Í/I STANDBY/ON button/indicator: Switch the main power of the unit on and off. While can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
  • Page 5: Front Panel (N-50Ae)

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Front Panel (N-50AE) Part Names           1. Í/I STANDBY/ON button/indicator: Switch the main power of the unit on and off. While can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
  • Page 6: Rear Panel (N-70Ae)

     5. AC IN: Connect the supplied power cord. 6. CONTROL OUT jack: By connecting Pioneer brand amplifiers and CD players, centralized control is possible, for example you can control the amplifiers and CD players from the Pioneer Remote App.
  • Page 7: Rear Panel (N-50Ae)

    CD player, for example. 5. AC IN: Connect the supplied power cord. 6. CONTROL OUT jack: By connecting Pioneer brand amplifiers and CD players, centralized control is possible, for example you can control the amplifiers and CD players from the Pioneer Remote App.
  • Page 8: Remote Controller

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Remote Controller 1. Í STANDBY/ON button: When the main power of the unit is on, this turns the unit on or into standby mode.
  • Page 9: Display

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Display   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 10: Connections With An Amplifier

    Integrated amplifier, AV receiver, etc. Connecting with an analog audio cable You can play the audio from network features such as N-70AE is used in the illustrations. N-50AE does not internet radio and from devices connected to this unit have an XLR jack.
  • Page 11 Connect the OPTICAL IN jack on an integrated amplifier with a digital optical cable to By connecting Pioneer brand amplifiers or CD players, for the DIGITAL OUT OPTICAL jack on this unit. example, that have control jacks using monaural miniplug cables (without resistors), you can centralize control of the devices using the Pioneer Remote App.
  • Page 12: Connecting The Power Cord, Etc

    To connect to the network with an ethernet cable, use the NETWORK jack. When using Wi-Fi connection, make settings in initial settings ( P12). When using N-70AE, make sure you have connected the supplied wireless antenna. ( P5) You can enjoy features such as internet radio and AirPlay by connecting to the network.
  • Page 13: Initial Setup

    "Hello" is displayed on the BLUE BLINKING display about 20 seconds later. After this, the display goes blank, then after the Pioneer logo is displayed, you can start operating the unit. Wi-Fi connection settings When you first turn the power on, the initial setup screen is displayed automatically, allowing you to easily make Wi-Fi connection settings.
  • Page 14 2. Select this device in the "SET UP NEW AIRPLAY SPEAKER..." item on the screen of the iOS device and select "Next". 2. Select either "Enter Password" or "Push Button" and 0 This unit is displayed as "Pioneer N-70AE XXXXXX" or confirm. If the access point has an automatic setting...
  • Page 15: Usb Storage Device/Hdd

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others USB Storage Device/HDD Playback Basic operations You can play music files by connecting a USB storage device or HDD (hard disk drive) to the USB port on the front or rear of the unit.
  • Page 16: Shuffle Play

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others DSD (DSF only) format music files. The formats for played by this unit. supported embedded images are JPEG and PNG. 0 If the USB storage device has been partitioned, each WAV (.wav/.WAV): 0 Characters that cannot be displayed by this unit appear...
  • Page 17: Internet Radio

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Internet Radio Basic operations You can use internet radio services such as TuneIn by connecting this unit to a network that has an internet connection.
  • Page 18: Basic Operation

    "Devices Available" at the bottom of the screen. 4. Select this unit. 0 This unit is displayed as "Pioneer N-70AE XXXXXX" or "Pioneer N-50AE XXXXXX". 5. This unit turns on automatically and the input selector changes to Network and streaming of Spotify starts.
  • Page 19: Airplay

    Wi-Fi 0 This unit is displayed as "Pioneer N-70AE XXXXXX" or iPhone "Pioneer N-50AE XXXXXX". 0 If an "AirPlay Password" has been set on this unit, Pioneer N-70AE XXXXXX enter the password you set.
  • Page 20: Music Server

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Music Server It is possible to stream music files stored on PCs or NAS there may be differences in the names of items you can devices connected to the same network as this unit.
  • Page 21 > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Controlling Remote Playback from a PC 0 Supported bitrates: Between 8 kbps and 320 kbps and 0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, VBR.
  • Page 22: Using A Computer To Save And Delete The Music On A Usb Hdd Connected To This Unit

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Using a computer to save and delete the music on a USB HDD connected to this unit Basic operations unit, display a list of devices connected to the network. 0 This unit is displayed as "Model name XXXXXX".
  • Page 23: Using This Unit As A D/A Converter

    To play the audio from a computer, you need to install the special driver on your computer. Download the driver software from our website. http://www.pioneer-audiovisual.eu/ Connections Use an A—B type USB cable to connect a computer. Use either a digital optical cable or digital coaxial cable, depending on the jacks on the device to be connected, to connect audio devices such as CD players.
  • Page 24 > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others When playing a device connected to the DIGITAL IN OPTICAL jack, press DIG IN 2 to change the input on this unit to "Digital In 2".
  • Page 25: Adjusting Sound Quality

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Adjusting sound quality Reproduce the original sound faithfully 0 This feature cannot be used when the DIRECT mode is (DIRECT mode) ∫...
  • Page 26: Entering Text

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Entering text Text entry, for passwords, etc., uses the following remote controller buttons. buttons (a): Each press changes the character. CLEAR button (b): Deletes the character in the cursor position.
  • Page 27: Supplementary Information For Player Functions

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Supplementary information for player functions Supplementary information Due to firmware (the software for the system) updates after you make your purchase or firmware changes during production of the product, there may be additions or changes to the features available compared to what is in the instruction manual.
  • Page 28: Advanced Settings

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Advanced Settings Advanced Setup The unit allows you to configure advanced settings to provide you with an even better experience. 1.
  • Page 29: Option Setting

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 0 You can make Wi-Fi connection settings using a web browser on a computer. For details, ∫ Network Check refer to “Web Setup” ( P29).
  • Page 30: System Info

    Make settings for digital audio output. "On" (Default Value), "Off" Web Setup ∫ Balance Out (N-70AE only) You can make Wi-Fi connection settings using a web browser on a computer. Be sure your computer is connected to the router wirelessly.
  • Page 31: Firmware Update

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Firmware Update Firmware Update The updating function on this unit How to update Updating the Firmware via Network This unit has functionality to update the firmware (the There are two methods for updating the firmware: via 0 Check that the unit is turned on, and the connection to system software) over a network or by the USB port.
  • Page 32 > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others If an error message is displayed: When an error occurs, Firmware files are named in the following way: 7. Press ENTER to start the firmware update. "¢-¢¢...
  • Page 33: Troubleshooting

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Troubleshooting Others Before starting the procedure connection may not be possible as the metal can effect ∫ The display doesn't light on the radio wave.
  • Page 34: Network Function

    0 For details, contact the manufacturer of the server software from our website. terminates its service. software. http://www.pioneer-audiovisual.eu/ 0 Make sure that your modem and router are properly 0 If there are multiple applications running on the connected, and make sure they are both turned on.
  • Page 35: General Specifications

    0 RCA OUT: 2.2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 0.3 W (In Standby) 0 XLR OUT (N-70AE): 4.2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 2.0 W (In Standby, Network Standby: On, Network Coaxial Digital Input Setting: Wired) 0 RCA Jack, 0.5 Vp-p / 75 ≠...
  • Page 36: License And Trademark Information

    > Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others License and Trademark Information ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 37 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
  • Page 38 Avant de Démarrer Ce que contient la boîte ............2 NETWORK AUDIO PLAYER Nom des pièces N-70AE Panneau frontal (N-70AE) ............3 Panneau frontal (N-50AE) ............4 Panneau arrière (N-70AE) ............5 Panneau arrière (N-50AE) ............6 Télécommande ............... 7 N-50AE Afficheur .................
  • Page 39: Avant De Démarrer

    Avant de Démarrer ≥ Pour le N-70AE uniquement Antenne sans fil (2) Appareil principal (1) (les illustrations montrent le modèle N-70AE) 0 Guide de démarrage rapide (1) 0 Ce document est un mode d'emploi en ligne. Il n'est pas inclus comme accessoire.
  • Page 40: Panneau Frontal (N-70Ae)

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Panneau frontal (N-70AE) Nom des pièces            ...
  • Page 41: Panneau Frontal (N-50Ae)

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Panneau frontal (N-50AE) Nom des pièces           1. Í/I Touche/témoin STANDBY/ON : Permet de mettre l'appareil sous tension ou hors 10.Port USB : Raccorder un périphérique de stockage USB ou un DD (disque dur) pour lire tension.
  • Page 42: Panneau Arrière (N-70Ae)

    5. AC IN : Permet de brancher le cordon d'alimentation fourni. 6. Prise CONTROL OUT : En y raccordant des amplificateurs et des lecteurs CD de marque Pioneer, le contrôle centralisé est possible. Vous pouvez, par exemple, contrôler les amplificateurs et les lecteurs CD avec Pioneer Remote App.
  • Page 43 5. AC IN : Permet de brancher le cordon d'alimentation fourni. 6. Prise CONTROL OUT : En y raccordant des amplificateurs et des lecteurs CD de marque Pioneer, le contrôle centralisé est possible. Vous pouvez, par exemple, contrôler les amplificateurs et les lecteurs CD avec Pioneer Remote App.
  • Page 44: Télécommande

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Télécommande 1. Touche Í STANDBY/ON : Lorsque l'appareil est sous tension, ceci permet de mettre l'appareil en marche ou en veille. La mise sous tension ou hors tension ne peut pas être ...
  • Page 45: Afficheur

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Afficheur   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 46: Raccordements Avec Un Amplificateur

    Amplificateur intégré, récepteur AV, etc. Raccordement à l'aide d'un câble audio Vous pouvez lire le son des fonctionnalités réseau comme Le modèle N-70AE sert aux illustrations. Le modèle N- la radio internet et des périphériques raccordés à cet analogique 50AE ne possède pas de prise XLR.
  • Page 47: Raccordement À L'aide D'un Câble Xlr (N70Ae Uniquement)

    Amplificateur La prise de contrôle En raccordant des amplificateurs ou des lecteurs CD de marque Pioneer, par exemple, munis de prises de contrôle avec des câbles de connexion mini-prise en monaural (sans résistances), vous pouvez centraliser le contrôle des appareils en utilisant Pioneer Remote App.
  • Page 48: Branchement Du Cordon D'alimentation, Etc

    NETWORK. Si vous utilisez une connexion Wi-Fi, indiquez les paramètres lors de la configuration initiale ( P12). Si vous utilisez le modèle N-70AE, assurez- vous d'avoir branché l'antenne sans fil fournie. ( P5) Vous pouvez profiter des fonctionnalités comme la radio Internet et AirPlay en vous connectant au réseau.
  • Page 49: Initial Setup

    BLUE BLINKING "Hello" apparait sur l'afficheur environ 20 secondes plus tard. Après quoi, l'écran devient noir quelques instants et le logo Pioneer s'affiche. Vous pouvez, dès lors, commencer à utiliser l'appareil. Paramètres de connexion Wi-Fi Lors de la première mise sous tension, l'écran de configuration initiale s'affiche automatiquement, et vous permet de définir...
  • Page 50 "Next". Groupe Onkyo et d'accepter les règles de confidentialité 0 Cet appareil s'affiche sous le nom "Pioneer N-70AE nécessaires pour utiliser la fonctionnalité Chromecast XXXXXX" ou "Pioneer N-50AE XXXXXX".
  • Page 51 > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres 0 Si vous sélectionnez "None", passez à l'étape 3. Si vous sélectionnez "WEP", "WPA" ou "WPA2", saisissez le mot de passe puis validez. s'affiche lorsque les réglages sont terminés.
  • Page 52: Périphérique De Stockage Usb/Dd

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Périphérique de stockage USB/DD Lecture Commandes de base Vous pouvez lire des fichiers musicaux en connectant un périphérique de stockage USB ou un DD (disque dur) au port USB situé...
  • Page 53 > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres 0 L'affichage du nom de l'album, du nom de l'artiste et de la certains périphériques ne peuvent pas être lus par cet par droits d'auteur ne peuvent pas être lus sur cet appareil.
  • Page 54 > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres 0 Bits de quantification: 8 bits, 16 bits, 24 bits Apple Lossless (.m4a/.mp4/.M4A/.MP4): 0 Taux d’échantillonnage pris en charge : 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz 0 Bits de quantification: 16 bits, 24 bits DSD (.dsf/.dff/.DSF/.DFF):...
  • Page 55: Radio Internet

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Radio Internet Commandes de base Vous pouvez utiliser les services de radio Internet comme TuneIn en connectant cet appareil à un réseau possédant une connexion Internet.
  • Page 56 à contrôler la lecture, touchez "Devices Available" au bas de l'écran. 4. Sélectionnez cet appareil. 0 Cet appareil s'affiche sous le nom "Pioneer N-70AE XXXXXX" ou "Pioneer N-50AE XXXXXX". 5. Cet appareil s’allume automatiquement, le sélecteur d’entrée passe automatiquement sur Network et la...
  • Page 57: Airplay

    Wi-Fi sélectionnez cet appareil dans la liste des périphériques iPhone affichée. 0 Cet appareil s'affiche sous le nom "Pioneer N-70AE Pioneer N-70AE XXXXXX XXXXXX" ou "Pioneer N-50AE XXXXXX". 0 Si un "AirPlay Password" a été défini sur cet appareil, saisissez le mot de passe défini.
  • Page 58: Music Server

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Music Server Il est possible de diffuser en flux des fichiers de musique 3. Cliquez sur "Turn on media streaming" pour afficher une présents sur les ordinateurs ou dispositifs NAS connectés liste de lecteurs dans le réseau.
  • Page 59 > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Contrôler la lecture distance à partir d'un PC 0 Notez que la lecture via une connexion LAN sans fil des 0 Formats pris en charge: MPEG-2/MPEG-4 Audio taux d'échantillonnage de 88,2 kHz ou plus, et DSD ne 0 Taux d’échantillonnage pris en charge : 44,1 kHz,...
  • Page 60: Utilisation D'un Ordinateur Pour Sauvegarder Et Supprimer La Musique

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Utilisation d'un ordinateur pour sauvegarder et supprimer la musique présente sur un HDD USB raccordé à cet appareil Commandes de base 4.
  • Page 61: Utilisation De Cet Appareil Comme Convertisseur D/A

    Pour lire le son provenant d'un ordinateur, vous aurez besoin d'installer un pilote spécial sur votre ordinateur. Téléchargez le pilote depuis notre site Web. http://www.pioneer-audiovisual.eu/ Connexions Utilisez un câble USB de type A—B pour raccorder un ordinateur. Utilisez un câble optonumérique ou bien un câble coaxial numérique, en fonction des prises présentes...
  • Page 62 > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Pour lire un périphérique raccordé à la prise DIGITAL IN OPTICAL, appuyez sur DIG IN 2 pour mettre l'entrée de cet appareil sur "Digital In 2".
  • Page 63: Réglage De La Qualité Du Son

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Réglage de la qualité du son Reproduire fidèlement le son original (mode activer ou désactiver la fonctionnalité. 0 Cette fonctionnalité ne peut pas être utilisée si le mode DIRECT) DIRECT est activé.
  • Page 64: Saisie Du Texte

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Saisie du texte La saisie de texte, pour les mots de passe, etc. nécessite l'utilisation des touches suivantes de la télécommande. Touches (a): Chaque pression permet de modifier le caractère.
  • Page 65: Informations Supplémentaires Concernant Les Fonctions Du Lecteur

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Informations supplémentaires concernant les fonctions du lecteur Informations supplémentaires À cause des mises à jour du micrologiciel (le logiciel du système) effectuées après l'achat ou des modifications du micrologiciel durant la production du produit, il pourrait y avoir des ajouts ou des changements des fonctionnalités...
  • Page 66: Configuration Avancée

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Configuration avancée Configuration avancée L'appareil vous permet de configurer les paramètres avancés pour qu'ils vous fournissent une expérience encore meilleure. 1.
  • Page 67: Option Setting

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres 0 Vous pouvez effectuer le réglage des paramètres de connexion Wi-Fi à l’aide d’un voir "Saisie du texte" ( P27).
  • Page 68 Si cet appareil est connecté au routeur à l’aide d’un câble Ethernet, vous ne pouvez pas effectuer ce réglage. ∫ Balance Out (N-70AE uniquement) 1. Mettez en marche l’appareil. 2. Appuyez sur la touche SETUP de la télécommande, sélectionnez "Wi-Fi" dans "Network Vous pouvez changer la phase de la prise XLR ANALOG OUT de cet appareil pour qu'elle Setting"...
  • Page 69: Mise À Jour Du Micrologiciel

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Mise à jour du micrologiciel Mise à jour du micrologiciel La fonction de mise à jour de cet appareil Comment mettre à...
  • Page 70: Mise À Jour Via Usb

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres terminé et votre micrologiciel est mis à jour à la dernière de son contenu. "via USB" dans l'ordre indiqué. version.
  • Page 71: Dépannage

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Dépannage Autres Avant de démarrer la procédure Le témoin Í/I STANDBY/ON sur l'appareil principal vous désiriez. Si cela arrive, utilisez la méthode de continue de clignoter en bleu et aucune action n'est connexion nécessitant la saisie d'un mot de passe.
  • Page 72 > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres ∫ Impossible de lire un périphérique de ∫ Sauvegarde et suppression de la musique Impossible d'accéder au serveur de réseau 0 Cet appareil doit être connecté...
  • Page 73 Informations supplémentaires | Configuration avancée | Autres besoin d'installer un pilote spécial sur votre ordinateur. Téléchargez le pilote depuis notre site Web. http://www.pioneer-audiovisual.eu/ 0 Si plusieurs applications tournent sur l'ordinateur, quittez les applications que vous n'utilisez pas. La fréquence d'échantillonnage est toujours la même par le biais de l'entrée USB DAC In...
  • Page 74: Caractéristiques Générales

    0 RCA OUT: 2,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 0,3 W (en Veille) 0 XLR OUT (N-70AE): 4,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 2,0 W (en Veille, Network Standby : On, Network Setting : Entrée numérique coaxiale...
  • Page 75: Licence Et Marque Commerciale

    > Avant de Démarrer > Nom des pièces > Installation > Initial Setup > Lecture Informations supplémentaires | Configuration avancée | Autres Licence et Marque commerciale ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 76 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
  • Page 77: Initial Setup

    Qué se encuentra en la caja ........... 2 NETWORK AUDIO PLAYER Nombres de las piezas N-70AE Panel frontal (N-70AE) ............3 Panel frontal (N-50AE) ............4 Panel trasero (N-70AE) ............5 Panel trasero (N-50AE) ............6 Mando a distancia ..............7 N-50AE Pantalla ...................
  • Page 78: Antes De Empezar

    Qué se encuentra en la caja Antes de empezar ≥ Solo N-70AE Antena inalámbrica (2) Unidad principal (1) (en las ilustraciones se usa N-70AE) 0 Guía de inicio rápido (1) 0 Este documento es un manual de instrucciones en línea. No se incluye como accesorio.
  • Page 79: Panel Frontal (N-70Ae)

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Panel frontal (N-70AE) Nombres de las piezas          ...
  • Page 80: Panel Frontal (N-50Ae)

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Panel frontal (N-50AE) Nombres de las piezas           1.
  • Page 81: Panel Trasero (N-70Ae)

    CD, por ejemplo. 5. AC IN: Conecte el cable de alimentación suministrado. 6. Conector CONTROL OUT: Si conecta amplificadores de la marca Pioneer y reproductores de CD, puede centralizar el control. Por ejemplo, puede controlar los amplificadores y los reproductores de CD desde Pioneer Remote App.
  • Page 82: Panel Trasero (N-50Ae)

    CD, por ejemplo. 5. AC IN: Conecte el cable de alimentación suministrado. 6. Conector CONTROL OUT: Si conecta amplificadores de la marca Pioneer y reproductores de CD, puede centralizar el control. Por ejemplo, puede controlar los amplificadores y los reproductores de CD desde Pioneer Remote App.
  • Page 83: Mando A Distancia

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Mando a distancia 1. Botón Í STANDBY/ON: Cuando la alimentación principal de la unidad está encendida, este botón enciende la unidad o la pone en modo de espera. La alimentación principal no ...
  • Page 84: Pantalla

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Pantalla   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 85: Conexiones Con Un Amplificador

    Amplificador integrado, receptor de AV, etc. Conexión con un cable de audio analógico Puede reproducir el audio procedente de funciones de red En las ilustraciones se usa N-70AE. N-50AE no tiene como la radio por Internet y de otros dispositivos conector XLR.
  • Page 86 > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Conexión con un cable XLR (solo N-70AE) con todos los dispositivos conectados o entornos). cable de audio analógico. El control centralizado no puede funcionar correctamente únicamente con la La señal se convierte en analógica en el convertidor D/A de...
  • Page 87: Conexión Del Cable De Alimentación, Etc

    NETWORK. Cuando utilice una conexión Wi-Fi, realice ajustes en la configuración inicial ( P12). Cuando utilice N-70AE, asegúrese de haber conectado la antena inalámbrica suministrada. ( P5) Puede disfrutar de funciones como la radio por internet y AirPlay conectándose a la red.
  • Page 88: Initial Setup

    "Hello" en la pantalla. Tras esto, la pantalla se queda en blanco y después de que aparezca el logo Pioneer, puede comenzar a usar la unidad. Configuración de la conexión Wi-Fi Cuando enciende la unidad por primera vez, se muestra automáticamente la pantalla de configuración inicial que le permite...
  • Page 89 "Next". Wireless Chromecast built-in y las operaciones para reproducirla, 0 Esta unidad se muestra como "Pioneer N-70AE consulte la hoja de instrucciones Chromecast built-in Enter Password XXXXXX" o "Pioneer N-50AE XXXXXX".
  • Page 90 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros 2. Seleccione y confirme el método de autenticación. Security Method None WPA2 0 Si selecciona "None", continúe con el paso 3. Si selecciona "WEP", "WPA"...
  • Page 91: Dispositivo De Almacenamiento Usb/Hdd

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Dispositivo de almacenamiento USB/HDD Reproducción Operaciones básicas Puede reproducir archivos de música conectando un dispositivo de almacenamiento USB o un HDD (disco duro) al puerto USB en la parte delantera o trasera de la unidad.
  • Page 92 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros 0 La visualización del nombre del álbum, el nombre del de la clase de dispositivos de almacenamiento. (Sin archivos de música.
  • Page 93 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros 0 Bit de cuantificación: 8 bits, 16 bits, 24 bits Apple Lossless (.m4a/.mp4/.M4A/.MP4): 0 Tasas de muestreo compatibles: 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz 0 Bit de cuantificación: 16 bits, 24 bits DSD (.dsf/.dff/.DSF/.DFF):...
  • Page 94: Radio Por Internet

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Radio por Internet Operaciones básicas Puede utilizar servicios de radio por internet como TuneIn conectando esta unidad a una red con conexión a internet. Dependiendo del servicio de radio por internet, puede que sea necesario que el usuario se registre antes desde su ordenador.
  • Page 95: Spotify

    "Devices Available" en la parte inferior de la pantalla. 4. Seleccione esta unidad. 0 Esta unidad se muestra como "Pioneer N-70AE XXXXXX" o "Pioneer N-50AE XXXXXX". 5. La unidad se encenderá automáticamente, el selector de entrada cambiará a Network y se iniciará la transmisión de Spotify.
  • Page 96: Airplay

    Pioneer N-70AE XXXXXX 0 Esta unidad se muestra como "Pioneer N-70AE XXXXXX" o "Pioneer N-50AE XXXXXX". 0 Si se ha establecido una "AirPlay Password" en esta unidad, introduzca la contraseña que estableció.
  • Page 97: Music Server

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Music Server Es posible transmitir archivos de música almacenados en 4. Seleccione esta unidad en "Media streaming options" y PC o dispositivos NAS conectados a la misma red que esta compruebe que está...
  • Page 98 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Controlar la reproducción remota desde un inalámbrica de velocidades de muestreo de 88,2 kHz o 0 Tasas de bits compatibles: Entre 8 kbps y 320 kbps y superior y DSD no son compatibles.
  • Page 99: Usar Un Ordenador Para Guardar Y Borrar La Música De Un Usb Hdd Conectado A Esta Unidad

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Usar un ordenador para guardar y borrar la música de un USB HDD conectado a esta unidad Operaciones básicas puerto USB de la parte trasera de la unidad principal.
  • Page 100: Usar Esta Unidad Como Convertidor D/A

    Para reproducir el audio desde un ordenador, es necesario que instale el controlador especial en su ordenador. Descargue el software del controlador desde nuestro sito web. http://www.pioneer-audiovisual.eu/ Conexiones Utilice un cable USB de tipo A—B para conectar un ordenador. Utilice un cable óptico digital o un cable coaxial...
  • Page 101 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros cuando reproduzca un dispositivo conectado al conector DIGITAL IN OPTICAL, pulse DIG IN 2 para cambiar la entrada en esta unidad a "Digital In 2".
  • Page 102: Ajuste De La Calidad De Sonido

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Ajuste de la calidad de sonido Reproducción fiel del sonido original (modo la función. 0 Esta función no se puede usar cuando el modo DIRECT DIRECT) está...
  • Page 103: Introducción De Texto

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Introducción de texto Para la introducción de texto, contraseñas, etc., se utilizan los siguientes botones del mando a distancia. Botones (a): Cada vez que pulsa cambia el carácter.
  • Page 104: Información Complementaria Sobre Las Funciones Del Reproductor

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Información complementaria sobre las funciones del reproductor Información complementaria Debido a las actualizaciones de firmware (el software del sistema) tras la compra o a cambio de firmware durante la producción del producto, es posible que se produzcan adiciones o cambios en las funciones disponibles en...
  • Page 105: Configuración Avanzada

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Configuración avanzada Configuración avanzada La unidad le permite configurar ajustes avanzados para brindarle una experiencia todavía mejor. 1.
  • Page 106 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros más información, consulte "Web Setup" ( P31). ENTER. ∫ DHCP ∫ Network Check "On" (Valor predeterminado): Configuración automática mediante DHCP Puede comprobar la conexión de red.
  • Page 107 "On" (Valor predeterminado), "Off" 1. Encienda la unidad. 2. Pulse SETUP en el mando a distancia, seleccione "Wi-Fi" en "Network Setting" - ∫ Balance Out (solo N-70AE) "Connection" y después seleccione "Wi-Fi Setup". 3. Pulse para seleccionar "Use iOS Device" y pulse ENTER.
  • Page 108: Actualización De Firmware

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Actualización de Firmware Actualización de Firmware La función de actualización de esta unidad Cómo actualizar Actualización del firmware a través de la red La unidad dispone de una función que permite actualizar el Existen dos métodos de actualización de firmware: por 0 Verifique que la unidad esté...
  • Page 109 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Si se visualiza un mensaje de error: Cuando ocurre un 0 No asumiremos ninguna responsabilidad por cualquier error, aparece el mensaje, "¢-¢¢...
  • Page 110: Resolución De Problemas

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Resolución de problemas Otros Antes de iniciar el procedimiento operaciones. que desee. Utilice el método de conexión que requiere la 0 Desconecte el cable de alimentación de la toma de introducción de una contraseña si esto ocurre.
  • Page 111 > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros ∫ No se puede reproducir un dispositivo de ∫ Guardar y borrar la música de un USB No se puede acceder al servidor de red 0 Esta unidad necesita estar conectada al mismo router almacenamiento USB / HDD...
  • Page 112 Otros necesario que instale el controlador especial en su ordenador. Descargue el software del controlador desde nuestro sitio web. http://www.pioneer-audiovisual.eu/ 0 Si se están ejecutando múltiples aplicaciones en el ordenador, apague las aplicaciones que no esté utilizando. La frecuencia de muestreo es siempre la misma a través de la entrada USB DAC In...
  • Page 113: Especificaciones Generales

    0 RCA OUT: 2,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 0,3 W (en modo de espera) 0 XLR OUT (N-70AE): 4,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 2,0 W (en modo de espera, Network Standby: On,...
  • Page 114: Información Sobre Licencias Y Marcas Comerciales

    > Antes de empezar > Nombres de las piezas > Instalación > Initial Setup > Reproducción Información complementaria | Configuración avanzada | Otros Información sobre licencias y marcas comerciales ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 115 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
  • Page 116: Prima Di Iniziare

    Informazioni aggiuntive | Impostazioni avanzate | Altri Prima di iniziare Contenuto della confezione ............ 2 NETWORK AUDIO PLAYER Nome dei componenti N-70AE Pannello frontale (N-70AE) ............. 3 Pannello frontale (N-50AE) ............. 4 Pannello posteriore (N-70AE) ..........5 Pannello posteriore (N-50AE) ..........6 Telecomando ................7 N-50AE Display ..................
  • Page 117: Contenuto Della Confezione

    Prima di iniziare ≥ Solo N-70AE Antenna wireless (2) Unità principale (1) (nelle illustrazioni viene usato N-70AE) 0 Guida rapida (1) 0 Questo documento è un manuale di istruzioni online. Non è incluso come accessorio. 0 Il cavo di alimentazione deve essere collegato solo dopo che sono stati completati tutti gli altri collegamenti.
  • Page 118: Pannello Frontale (N-70Ae)

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Pannello frontale (N-70AE) Nome dei componenti            ...
  • Page 119: Pannello Frontale (N-50Ae)

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Pannello frontale (N-50AE) Nome dei componenti           1. Í/I Pulsante/indicatore STANDBY/ON: Consente di accendere/spegnere l'unità. Durante disk drive) per la riproduzione di file musicali.
  • Page 120: Pannello Posteriore (N-70Ae)

    5. AC IN: Consente di collegare il cavo di alimentazione in dotazione. 6. Jack CONTROL OUT: Quando si collegano amplificatori e lettori CD Pioneer è possibile il controllo centralizzato. Per esempio, è possibile controllare gli amplificatori e i lettori CD per mezzo della App Pioneer Remote.
  • Page 121: Pannello Posteriore (N-50Ae)

    5. AC IN: Consente di collegare il cavo di alimentazione in dotazione. 6. Jack CONTROL OUT: Quando si collegano amplificatori e lettori CD Pioneer è possibile il controllo centralizzato. Per esempio, è possibile controllare gli amplificatori e i lettori CD per mezzo della App Pioneer Remote.
  • Page 122: Telecomando

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Telecomando 1. Tasto Í STANDBY/ON: Quando l'unità è alimentata, consente di accendere l'unità o di passare alla modalità standby. Non è possibile accendere o spegnere l'unità con il telecomando. ...
  • Page 123: Display

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Display   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 124: Installazione

    Amplificatore integrato, ricevitore AV, ecc. Collegamento con un cavo audio analogico È possibile riprodurre l'audio da funzionalità di rete, come Nelle illustrazioni viene usato N-70AE. N-50AE non Internet Radio, e dai dispositivi collegati a questa unità dispone di un terminale XLR.
  • Page 125 Terminale di controllo Quando si collegano amplificatori e lettori CD Pioneer, per esempio, dotati di terminali di controllo che impiegano cavi minijack mono (senza resistori), è possibile centralizzare il controllo dei dispositivi usando l'App Pioneer Remote.
  • Page 126: Collegamento Del Cavo Di Alimentazione, Ecc

    Per eseguire il collegamento alla rete con un cavo Ethernet, usare il terminale NETWORK. Se si utilizza un collegamento Wi-Fi, definire le impostazioni nelle impostazioni iniziali P12). Quando si utilizza N-70AE, verificare di aver collegato l'antenna wireless in dotazione. ( P5) È possibile utilizzare funzioni quali Internet radio e AirPlay collegandosi alla rete.
  • Page 127: Initial Setup

    20 BLUE BLINKING secondi, sul display compare la scritta "Hello". In seguito, la scritta scompare e viene visualizzato il logo Pioneer. A questo punto l'unità è pronta per essere utilizzata. Impostazioni per il collegamento Wi-Fi...
  • Page 128 AIRPLAY SPEAKER..." sullo schermo del dispositivo iOS funzionalità Chromecast built-in. Selezionare “Accept” e e selezionare "Next". premere ENTER per indicare l'accettazione. Per 0 Questa unità viene visualizzata come "Pioneer N- Wireless informazioni sulle impostazioni necessarie per l'utilizzo 70AE XXXXXX" o "Pioneer N-50AE XXXXXX".
  • Page 129 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri 2. Selezionare e confermare il metodo di autenticazione. Security Method None WPA2 0 Se si seleziona "None", procedere con il passaggio 3. Se si seleziona "WEP", "WPA"...
  • Page 130: Dispositivo Di Archiviazione Usb/Hdd

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Dispositivo di archiviazione USB/HDD Riproduzione Operazioni base I file musicali possono essere riprodotti anche collegando un dispositivo di archiviazione USB o un HDD (hard disk drive) alla porta USB sulla parte anteriore o posteriore dell'unità.
  • Page 131 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri riproduzione o scegliere i brani da riprodurre. archiviazione USB conformi allo standard USB Mass 0 Formati supportati: MPEG-1/MPEG-2 Audio Layer 3 0 La visualizzazione del nome dell'album, del nome Storage Class.
  • Page 132 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri 0 Frequenze di campionamento supportate: 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz 0 Bit di quantizzazione: 16 bit, 24 bit DSD (.dsf/.dff/.DSF/.DFF): 0 Formati supportati: DSF/DSDIFF 0 Frequenze di campionamento supportate: 2,8 MHz,...
  • Page 133: Internet Radio

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Internet radio Operazioni base È possibile usare servizi Internet radio quali TuneIn collegando questa unità a una rete collegata a Internet. A seconda del servizio di Internet radio utilizzato, l'utente potrebbe doversi registrare prima dal proprio computer.
  • Page 134: Spotify

    "Devices Available" nella parte inferiore della schermata. 4. Selezionare questa unità. 0 Questa unità viene visualizzata come "Pioneer N- 70AE XXXXXX" o "Pioneer N-50AE XXXXXX". 5. Questa unità si accende automaticamente, il selettore di ingresso passa a Network e viene avviato lo streaming di Spotify.
  • Page 135: Airplay

    Pioneer N-70AE XXXXXX 0 Questa unità viene visualizzata come "Pioneer N- 70AE XXXXXX" o "Pioneer N-50AE XXXXXX". 0 Se su questa unità è stata impostata una "AirPlay Password", immettere tale password. 3. Riprodurre i file musicali sul dispositivo iOS.
  • Page 136: Music Server

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Music Server È possibile eseguire lo streaming di file musicali verificare che sia impostata su "Allow". memorizzati su PC o dispositivi NAS collegati alla stessa 5.
  • Page 137 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Controllo della riproduzione in remoto da 0 Anche la riproduzione remota dei formati FLAC, e DSD 0 Velocità di trasmissione supportate: Tra 8 kbps e 320 non è...
  • Page 138: Utilizzo Di Un Computer Per Salvare Ed Eliminare Dei File Musicali Su Un Hdd Usb Collegato A Questa Unità

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Utilizzo di un computer per salvare ed eliminare dei file musicali su un HDD USB collegato a questa unità Operazioni base utilizzare un computer per accedere all’HDD collegato alla porta USB sul retro dell’unità...
  • Page 139: Utilizzo Di Questa Unità Come Convertitore D/A

    Per riprodurre l'audio da un computer, è necessario installare l'apposito driver sul computer. Scaricare il software del driver dal nostro sito web. http://www.pioneer-audiovisual.eu/ Connessioni Utilizzare un cavo USB di tipo A—B per effettuare il collegamento al computer. Utilizzare un cavo digitale ottico...
  • Page 140 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Durante la riproduzione da un dispositivo collegato al terminale DIGITAL IN OPTICAL, premere DIG IN 2 per selezionare l'ingresso "Digital In 2" su questa unità. Digital In 2 Durante la riproduzione da un dispositivo collegato al terminale DIGITAL IN COAXIAL, premere DIG IN 1 per...
  • Page 141: Regolazione Della Qualità Audio

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Regolazione della qualità audio Riproduzione fedele del suono originale disattivare la funzionalità. 0 Questa funzionalità non può essere usata quando la (modalità...
  • Page 142: Immissione Di Testo

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Immissione di testo Per immettere del testo, ad esempio per le password ecc., usare i tasti del telecomando. Pulsanti (a): ciascuna pressione modifica il carattere.
  • Page 143: Informazioni Aggiuntive Sulle Funzioni Del Lettore

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Informazioni aggiuntive sulle funzioni del lettore Informazioni aggiuntive A seguito di aggiornamenti del firmware (il software del sistema) effettuati dopo l'acquisto o di modifiche del firmware eseguite durante la fabbricazione del prodotto, poterebbero essere disponibili funzioni aggiuntive o modificate rispetto a quelle descritte nel presente manuale.
  • Page 144: Impostazioni Avanzate

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Impostazioni Avanzate Impostazioni avanzate Questa unità consente di configurare le impostazioni avanzate in modo da fornire un'esperienza ancora migliore. 1.
  • Page 145 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri 0 È possibile definire le impostazioni della connessione Wi-Fi usando un browser web su un testo, fare riferimento a "Immissione di testo" ( P27).
  • Page 146 "On" (Valore predefinito), "Off" computer. Assicurarsi che il computer sia collegato al router tramite una connessione wireless. Se questa unità è collegata al router mediante cavo Ethernet, questa impostazione non può ∫ Balance Out (Solo N-70AE) essere definita. 1. Accendere l'unità.
  • Page 147: Aggiornamento Del Firmware

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Aggiornamento del firmware Aggiornamento del firmware Funzione di aggiornamento su questa unità Procedura di aggiornamento Aggiornamento del firmware tramite rete Questa unità...
  • Page 148 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri disattivare l'alimentazione dell'unità. Il processo è loro contenuto. completato e il firmware è aggiornato all’ultima versione 0 Non saremo responsabili in alcun modo per qualsiasi disponibile.
  • Page 149: Risoluzione Dei Problemi

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Risoluzione dei problemi Altri Prima di iniziare la procedura corrente, attendere almeno 2 minuti, quindi ricollegarlo. comunicazione non funziona Se questo non risolve il problema, potrebbe trattarsi di un 0 Ridurre la distanza dal punto di accesso o rimuovere In caso di funzionamento instabile, i problemi potrebbero...
  • Page 150 ∫ Salvataggio ed eliminazione dei file 0 Assicurarsi che il router e/o il modem utilizzati siano http://www.pioneer-audiovisual.eu/ supportati dal proprio ISP. 0 Se sono presenti più applicazioni in esecuzione sul musicali presenti su un HDD USB collegato computer, chiudere quelle che non si stanno utilizzando.
  • Page 151 > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Attraverso l'ingresso USB DAC In vengono ricevuti anche gli altri suoni provenienti dal computer, non solo la musica. 0 A seconda delle impostazioni del computer, suoni quali toni di avvio o di errore possono essere riprodotti tramite questa unità.
  • Page 152: Caratteristiche Generali

    0 RCA OUT: 2,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 Tipo B, USB2.0 High Speed 0 0,3 W (in modalità standby) 0 XLR OUT (N-70AE): 4,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 2,0 W (In modalità standby, Network Standby: On, Ingresso coassiale digitale...
  • Page 153: Informazioni Di Licenza E Dei Marchi

    > Prima di iniziare > Nome dei componenti > Installazione > Initial Setup > Riproduzione Informazioni aggiuntive | Impostazioni avanzate | Altri Informazioni di licenza e dei marchi ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 154 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
  • Page 155 Ergänzende Informationen | Erweiterte Einrichtung | Andere Vor dem Start Lieferumfang ................2 NETWORK AUDIO PLAYER Teilenamen N-70AE Bedienfeld (N-70AE) ............... 3 Bedienfeld (N-50AE) ............... 4 Rückseite (N-70AE) ..............5 Rückseite (N-50AE) ..............6 Fernbedienung ............... 7 N-50AE Display ..................8 Installation Verbindungen mit einem Verstärker ........
  • Page 156: Vor Dem Start

    Lieferumfang Vor dem Start ≥ Nur N-70AE Kabellose Antenne (2) Hauptgerät (1) (N-70AE wird in den Abbildungen verwendet) 0 Kurzanleitung (1) 0 Bei diesem Dokument handelt es sich um eine Online-Bedienungsanleitung. Sie wird nicht als Zubehör mitgeliefert. 0 Das Netzkabel darf erst angeschlossen werden, wenn alle anderen Kabelverbindungen hergestellt wurden.
  • Page 157: Bedienfeld (N-70Ae)

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Bedienfeld (N-70AE) Teilenamen             1. Í/I STANDBY/ON-Taste/-Anzeige: Hier wird das Gerät ein-/ausgeschaltet. Wenn das um Musikdateien wiederzugeben.
  • Page 158: Bedienfeld (N-50Ae)

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Bedienfeld (N-50AE) Teilenamen           1. Í/I STANDBY/ON-Taste/-Anzeige: Hier wird das Gerät ein-/ausgeschaltet. Wenn das um Musikdateien wiederzugeben.
  • Page 159: Rückseite (N-70Ae)

    Koaxialkabel, um beispielsweise einen CD-Player anzuschließen. 5. AC IN: Schließen Sie das mitgelieferte Netzkabel an. 6. CONTROL OUT-Buchse: Wenn Verstärker und CD-Player von Pioneer angeschlossen werden, ist eine zentrale Bedienung möglich. Sie können die Verstärker oder CD-Player...
  • Page 160: Rückseite (N-50Ae)

    Koaxialkabel, um beispielsweise einen CD-Player anzuschließen. 5. AC IN: Schließen Sie das mitgelieferte Netzkabel an. 6. CONTROL OUT-Buchse: Wenn Verstärker und CD-Player von Pioneer angeschlossen werden, ist eine zentrale Bedienung möglich. Sie können die Verstärker oder CD-Player beispielsweise über die Remote-App von Pioneer bedienen.
  • Page 161: Fernbedienung

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Fernbedienung 1. Í STANDBY/ON-Taste: Wenn das Gerät eingeschaltet ist, wird es hiermit ausgeschaltet bzw. in den Standby-Modus geschaltet. Das Gerät kann nicht mit der Fernbedienung ein-/ ...
  • Page 162: Display

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Display   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 163: Verbindungen Mit Einem Verstärker

    Integrierter Verstärker, AV-Receiver usw. Anschließen über ein analoges Audiokabel Sie können Audio von Netzwerk-Features wie Internetradio N-70AE wird in den Abbildungen verwendet. N-50AE sowie von anderen Geräten, die mit diesem Gerät weist keine XLR-Buchse auf. Das Signal wird vom D/A-Wandler dieses Geräts in ein verbunden sind, über Lautsprechersysteme wiedergeben,...
  • Page 164 Geräten und in allen Umgebungen OPTICAL-Buchse an diesem Gerät. gewährleistet werden). CONTROL-Buchse Wenn Verstärker und CD-Player von Pioneer mit Control- Buchsen über Mono-Ministeckerkabel (ohne Widerstand) angeschlossen werden, ist eine zentrale Bedienung möglich. Sie können die Verstärker oder CD-Player beispielsweise über CONTROL die Remote-App von Pioneer bedienen.
  • Page 165: Anschließen Des Netzkabels Usw

    Sie die NETWORK-Buchse. Wenn Sie eine Wi-Fi-Verbindung verwenden möchten, nehmen Sie in den ersten Einstellungen entsprechende Einstellungen vor ( P12). Wenn Sie N-70AE verwenden, achten Sie darauf, dass Sie die mitgelieferte WLAN- Antenne angeschlossen haben. ( P5) Mit einer Netzwerkverbindung können Sie Features wie Internetradio...
  • Page 166: Initial Setup

    Bildschirmmitte langsam blau. Etwa 20 Sekunden später BLUE BLINKING wird "Hello" auf dem Display angezeigt. Die Anzeige erlischt, dann wird das Pioneer-Logo angezeigt, und Sie können das Gerät in Betrieb nehmen. Wi-Fi-Verbindungseinstellungen Wenn Sie das Gerät erstmalig einschalten, wird der...
  • Page 167 Geräts im Element "SET UP NEW AIRPLAY Button" ohne Passworteingabe herstellen. SPEAKER..." aus und wählen Sie "Next" aus. Wireless 0 Dieses Gerät wird als "Pioneer N-70AE XXXXXX" oder "Pioneer N-50AE XXXXXX" angezeigt. Scan Networks Wireless 3. Wenn die Verbindung hergestellt wurde, wählen Sie im Use iOS Device Bildschirm des iOS-Geräts "Done"...
  • Page 168 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere 1. Geben Sie die SSID ein. Einzelheiten zum Eingeben von Text finden Sie unter "Eingeben von Text" ( P27). SSID [REPEAT] Change Text [CLEAR]...
  • Page 169: Usb-Speichergerät/Hdd

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere USB-Speichergerät/HDD Wiedergabe Grundlegende Funktionen Sie können Musikdateien wiedergeben, indem Sie ein USB- Speichergerät oder HDD (Hard Disk Drive) an den USB- Port an der Vorder- oder Rückseite des Geräts anschließen.
  • Page 170 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Unterstützte Audioformate Wiedergabe zu stoppen oder Tracks zur Wiedergabe 0 Von diesem Gerät werden USB-Speichergeräte auszuwählen. unterstützt, die den USB-Massenspeichergeräteklasse- Dieses Gerät unterstützt die folgenden Musikdateiformate.
  • Page 171 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere VBR. FLAC (.flac/.FLAC): 0 Unterstützte Abtastfrequenzen: 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz 0 Quantisierungsbit: 8 Bit, 16 Bit, 24 Bit Apple Lossless (.m4a/.mp4/.M4A/.MP4): 0 Unterstützte Abtastfrequenzen: 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz...
  • Page 172: Internetradio

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Internetradio Grundlegende Funktionen aus und bestätigen die Auswahl. Sie können Internetradio-Dienste wie TuneIn benutzen, indem Sie dieses Gerät an ein Netzwerk anschließen, das eine Internetverbindung hat.
  • Page 173: Spotify

    Wiedergabe und tippen Sie unten auf dem Bildschirm auf "Devices Available". 4. Wählen Sie dieses Gerät aus. 0 Dieses Gerät wird als "Pioneer N-70AE XXXXXX" oder "Pioneer N-50AE XXXXXX" angezeigt. 5. Dieses Gerät wird automatisch eingeschaltet, der Eingangsselektor zu Network gewechselt und das Streaming von Spotify gestartet.
  • Page 174: Airplay

    AirPlay-Symbol und wählen Sie iPhone aus der angezeigten Liste von Geräten dieses Gerät aus. 0 Dieses Gerät wird als "Pioneer N-70AE XXXXXX" oder Pioneer N-70AE XXXXXX "Pioneer N-50AE XXXXXX" angezeigt. 0 Wenn auf diesem Gerät ein "AirPlay Password"...
  • Page 175: Music Server

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Music Server Das Streaming von Musikdateien, die auf PCs oder NAS- wählen Sie "Weitere Datenstromoptionen..." im Menü Geräten gespeichert sind, welche mit demselben Netzwerk "Datenstrom", um die Player im Netzwerk aufzulisten wie dieses Gerät verbunden sind, ist möglich.
  • Page 176: Unterstützte Audioformate

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Netzwerkverbindung. einem USB-Speichergerät wiedergegeben werden. AIFF (.aiff/.aif/.AIFF/.AIF): 0 Je nach verwendetem Server und wiedergegebenen 0 Je nach Version von Windows können sich die Namen AIFF-Dateien enthalten unkomprimiertes digitales PCM- Dateien wird die vergangene und verbleibende der auswählbaren Elemente unterscheiden.
  • Page 177 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Speichern und Löschen von Musik auf einer USB-Festplatte mithilfe eines Computers, der mit diesem Gerät verbunden ist Grundlegende Funktionen 4. Schalten Sie dieses Gerät in den Standby-Modus. 0 Wenn dieses Gerät eingeschaltet ist, können Sie nicht Sie können Musikdateien direkt über ein Netzwerk mit einem Computer auf die Festplatte zugreifen, die...
  • Page 178: Verwenden Dieses Geräts Als D/A-Wandler

    Sie müssen den speziellen Treiber auf Ihrem Computer installieren, wenn Audiosignale von diesem Computer wiedergegeben werden sollen. Laden Sie die Treibersoftware von unserer Website herunter: http://www.pioneer-audiovisual.eu/ Anschlüsse Verwenden Sie ein USB-Kabel (A—B-Typ), um einen Computer anzuschließen. Verwenden Sie entweder ein digitales optisches Kabel oder ein digitales Koaxialkabel je nach den Buchsen des Geräts, das angeschlossen werden...
  • Page 179 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Wenn die Wiedergabe von einem Gerät erfolgen soll, das Signale mit einer Abtastfrequenz und Quantisierungs- an die DIGITAL IN OPTICAL-Buchse angeschlossen ist, Bitrate von bis zu 192 kHz/24 Bit drücken Sie DIG IN 2, um den Eingang an diesem Gerät zu "Digital In 2"...
  • Page 180: Anpassen Der Klangqualität

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Anpassen der Klangqualität Der Originalklang wird naturgetreu 0 Sie können auch A.S.R (b) drücken, um die Funktion ein- /auszuschalten. reproduziert (DIRECT-Modus) 0 Diese Funktion kann im DIRECT-Modus nicht verwendet Verarbeitungen, welche die Klangqualität beeinträchtigen, werden.
  • Page 181: Eingeben Von Text

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Eingeben von Text Texteingabe bei Passwörtern usw. erfolgt über die Tasten der Fernbedienung. / -Tasten (a): Bei jedem Tastendruck wird das Zeichen geändert.
  • Page 182: Ergänzende Informationen Zu Den Funktionen Des Players

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Ergänzende Informationen zu den Funktionen des Players Ergänzende Informationen Aufgrund von Updates an der Firmware (System-Software) nach dem Kauf oder Änderungen an der Firmware während der Herstellung kann es zu Abweichungen zwischen verfügbaren Funktionen und Bedienungsanleitung kommen.
  • Page 183: Erweiterte Einstellungen

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Erweiterte Einstellungen Erweiterte Einrichtung Mit den erweiterten Einstellungen dieses Geräts können Sie Leistung und Bedienfreundlichkeit individuell anpassen. 1. Drücken Sie SETUP auf der Fernbedienung. Setup Network Setting Option Setting...
  • Page 184 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere 0 Sie können die Wi-Fi-Verbindungseinstellungen über einen Webbrowser am Computer von Text" ( P27). Wenn die Eingabe beendet ist, drücken Sie ENTER. vornehmen.
  • Page 185 Router verbunden ist. Wenn dieses Gerät über ein Ethernet-Kabel mit dem Router verbunden ist, kann diese ∫ Balance Out (nur N-70AE) Einstellung nicht vorgenommen werden. Sie können die Phase der XLR ANALOG OUT-Buchse an diesem Gerät ändern und an die 1.
  • Page 186 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere 6. Das "Web Setup"-Menü wird geöffnet. Nehmen Sie Netzwerkeinstellungen für dieses Gerät vor. 0 Je nach verwendeten Geräten und nach Anschlussumgebung ist diese Funktion möglicherweise nicht verfügbar.
  • Page 187: Firmware-Update

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Firmware-Update Firmware-Update Update-Funktion dieses Geräts So wird das Update ausgeführt Aktualisierung der Firmware über das Netzwerk Bei diesem Gerät kann die Firmware (Systemsoftware) Es gibt zwei Möglichkeiten zur Aktualisierung der Firmware: über ein Netzwerk oder den USB-Port aktualisiert werden.
  • Page 188 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere abgeschlossen ist. 0 Wir übernehmen keinerlei Haftung für Datenverluste, 4. Drücken Sie Í/I STANDBY/ON am Hauptgerät, um das Schäden an Daten oder fehlerhafte Speichervorgänge, Gerät auszuschalten.
  • Page 189: Fehlerbehebung

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Fehlerbehebung Andere Bevor Sie den Vorgang starten Die Í/I STANDBY/ON-Anzeige am Hauptgerät blinkt 0 Bei einigen Zugangspunkten ist es möglich, mehrere weiterhin blau, und es sind keine Bedienvorgänge SSIDs für ein Gerät einzurichten.
  • Page 190 > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere sicher, dass beide eingeschaltet sind. 0 Einzelheiten erfahren Sie beim Hersteller der Es erfolgt keine digitale Klangausgabe 0 Je nach ISP ist die Einstellung des Proxyservers Serversoftware.
  • Page 191 0 Sie müssen den speziellen Treiber auf Ihrem Computer installieren, wenn Audiosignale von diesem Computer wiedergegeben werden sollen. Laden Sie die Treibersoftware von unserer Website herunter: http://www.pioneer-audiovisual.eu/ 0 Werden mehrere Anwendungen gleichzeitig auf dem Computer ausgeführt, schließen Sie die Anwendungen, die Sie nicht benötigen.
  • Page 192: Allgemeine Technische Daten

    0 RCA OUT: 2,2 Vrms (1 kHz, 0 dB) / 500 ≠ USB DAC 0 N-50AE: 30,0 W 0 XLR OUT (N-70AE): 4,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 Typ A, USB 2.0 High-Speed 0 0,3 W (Im Standby-Modus)
  • Page 193: Lizenz- Und Warenzeicheninformationen

    > Vor dem Start > Teilenamen > Installation > Initial Setup > Wiedergabe Ergänzende Informationen | Erweiterte Einrichtung | Andere Lizenz- und Warenzeicheninformationen ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 194 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
  • Page 195: Vóór Het Starten

    Extra informatie | Geavanceerde Setup | Overige Vóór het Starten Wat zit er in de doos ............... 2 NETWORK AUDIO PLAYER Namen van de onderdelen N-70AE Voorpaneel (N-70AE) ............. 3 Voorpaneel (N-50AE) ............. 4 Achterpaneel (N-70AE) ............5 Achterpaneel (N-50AE) ............6 Afstandsbediening ..............7 N-50AE Display ..................
  • Page 196: Wat Zit Er In De Doos

    Wat zit er in de doos Vóór het Starten ≥ alleen N-70AE Draadloze antenne (2) Hoofdtoestel (1) (in de afbeeldingen wordt de N-70AE gebruikt) 0 Snelle Startgids (1) 0 Dit document is een online instructiehandleiding. Deze is niet als accessoire bijgesloten.
  • Page 197: Voorpaneel (N-70Ae)

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Voorpaneel (N-70AE) Namen van de onderdelen           ...
  • Page 198: Voorpaneel (N-50Ae)

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Voorpaneel (N-50AE) Namen van de onderdelen           1. Í/I STANDBY/ON-knop/controlelampje: Schakelt de netspanning van het toestel aan en muziekbestanden af te spelen.
  • Page 199: Achterpaneel (N-70Ae)

    CD-speler te verbinden. 5. AC IN: Verbind het bijgeleverde netsnoer. 6. CONTROL OUT-aansluiting: Door versterkers van het merk Pioneer en CD-spelers te verbinden, is een gecentraliseerde bediening mogelijk. U kunt de versterkers en de CD- spelers bijvoorbeeld bedienen met de Pioneer Remote App.
  • Page 200: Achterpaneel (N-50Ae)

    CD-speler te verbinden. 5. AC IN: Verbind het bijgeleverde netsnoer. 6. CONTROL OUT-aansluiting: Door versterkers van het merk Pioneer en CD-spelers te verbinden, is een gecentraliseerde bediening mogelijk. U kunt de versterkers en de CD- spelers bijvoorbeeld bedienen met de Pioneer Remote App.
  • Page 201: Afstandsbediening

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Afstandsbediening 1. Í STANDBY/ON-knop: Als de netvoeding van het toestel ingeschakeld is, schakelt deze knop het toestel in of op de stand-by-modus. De hoofdstroom kan niet in- of uitgeschakeld ...
  • Page 202: Display

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Display   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 203: Verbindingen Met Een Versterker

    Geïntegreerde versterker, AV-ontvanger, enz. Verbinden met een analoge audiokabel U kunt audio afspelen die afkomstig is van netwerkfuncties In de afbeeldingen wordt de N-70AE gebruikt. De N- zoals internetradio, en van apparaten die met dit toestel 50AE heeft geen XLR-aansluiting.
  • Page 204 DIGITAL OUT OPTICAL-aansluiting op dit toestel. Versterker De bedieniningsaansluiting Door versterkers van het merk Pioneer of CD-spelers te verbinden, die bijvoorbeeld bedieningsaansluitingen voor mono ministekkerkabels (zonder weerstanden) hebben, kunt u de bediening van de apparaten centraliseren met gebruik van de Pioneer Remote App.
  • Page 205: Het Netsnoer Verbinden, Enz

    NETWORK-aansluiting gebruiken. Wanneer u een Wi-Fi-verbinding gebruikt, maak dan instellingen in de begininstellingen ( P12). Als de N-70AE gebruikt wordt, zorg er dan voor dat de bijgeleverde draadloze antenne verbonden is. ( P5) U kunt van kenmerken genieten zoals internetradio en AirPlay door verbinding met het netwerk te maken.
  • Page 206: Initial Setup

    BLUE BLINKING vervolgens wordt ongeveer 20 seconden later "Hello" op het display weergegeven. Hierna wordt de display leeg, vervolgens kunt u nadat het Pioneer logo afgebeeld wordt starten met het bedienen van het toestel. Wi-Fi-verbindinginstellingen Wanneer u voor het eerst de stroom aanzet, wordt automatisch het begininstellingsscherm afgebeeld wat u toelaat gemakkelijk Wi-Fi-verbindingsinstellingen te maken.
  • Page 207 Selecteer “Accept” en druk op ENTER om uw en selecteer "Next". instemming kenbaar te maken. Raadpleeg voor informatie 0 Dit toestel wordt weergegeven als "Pioneer N-70AE Wireless over de instellingen die vereist worden om de Chromecast XXXXXX" of "Pioneer N-50AE XXXXXX".
  • Page 208 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige 2. Selecteer en bevestig de verificatie-methode. Security Method None WPA2 0 Als u "None" selecteert, doorgaan naar stap 3. Als u "WEP", "WPA", of "WPA2"...
  • Page 209: Usb-Opslagapparaat/Hdd

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige USB-opslagapparaat/HDD Afspelen Basisbedieningen U kunt muziekbestanden afspelen door een USB- opslagapparaat te of HDD (hard disk drive) aan de USB- poort te verbinden op de voor- of achterkant van het toestel.
  • Page 210 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige nummers om af te spelen te kiezen. massaopslagklasse.) 0 Ondersteunde bitsnelheden: Tussen 8 kbps en 320 kbps 0 Het display van albumnaam, artiestnaam en album art 0 Het toestel is ook compatibel met USB-opslagapparaten en VBR...
  • Page 211 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz 0 Kwantiseringsbit: 16 bit, 24 bit DSD (.dsf/.dff/.DSF/.DFF): 0 Ondersteunde formaten: DSF/DSDIFF 0 Ondersteunde bemonsteringsfrequenties: 2,8 MHz, 5,6 MHz, 11,2 MHz...
  • Page 212: Internetradio

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Internetradio Basisbedieningen U kunt internetradiodiensten zoals TuneIn gebruiken door dit toestel met een netwerk met een internetverbinding te verbinden.
  • Page 213: Spotify

    "Devices Available" aan op de onderkant van het scherm. 4. Selecteer dit toestel. 0 Dit toestel wordt weergegeven als "Pioneer N-70AE XXXXXX" of "Pioneer N-50AE XXXXXX". 5. Dit toestel wordt automatisch ingeschakeld en de ingangskeuzeschakelaar verandert in Network en het streamen van Spotify start.
  • Page 214: Airplay

    Wi-Fi in de weergegeven lijst met apparaten. iPhone 0 Dit toestel wordt weergegeven als "Pioneer N-70AE XXXXXX" of "Pioneer N-50AE XXXXXX". Pioneer N-70AE XXXXXX 0 Als een "AirPlay Password" niet ingesteld is op dit toestel, het wachtwoord dat u instelde invoeren.
  • Page 215: Music Server

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Music Server Het is mogelijk muziekbestanden te streamen die opgeslagen spelers in het netwerk weer te geven. zijn op PC's of NAS-apparaten die met hetzelfde netwerk 4.
  • Page 216 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Afspelen op afstand bedienen vanaf een PC LAN, van bemonsteringsfrequenties van 88,2 kHz of AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/ hoger, en DSD niet ondersteund worden. .3G2): U kunt deze unit gebruiken om muziekbestanden 0 Het remote afspelen van FLAC en DSD wordt ook niet...
  • Page 217: Verbonden Is

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Gebruik een computer voor het opslaan en wissen van de muziek die op een USB HDD staat die met dit toestel verbonden is Basisbedieningen 4.
  • Page 218: Dit Toestel Als D/A-Converter Gebruiken

    Om de audio vanaf een computer af te spelen, moet u de speciale driver op uw computer installeren. Download de driver-software van uw website. http://www.pioneer-audiovisual.eu/ Aansluitingen Gebruik een USB-kabel type A—B om een computer te verbinden. Gebruik een digitale optische kabel of een...
  • Page 219 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Wanneer u een apparaat afspeelt date verbonden is met signalen met een bemonsteringsfrequentie en de DIGITAL IN OPTICAL-aansluiting, druk dan op DIG IN quantisatie bit-rate tot 192 kHz/24 bit 2 om de ingang op dit toestel in "Digital In 2"...
  • Page 220: Aanpassen Van Geluidskwaliteit

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Aanpassen van geluidskwaliteit Reproduceert getrouw het oorspronkelijke 0 U kunt ook op A.S.R (b) drukken om de functie in en uit te schakelen.
  • Page 221: Invoeren Tekst

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Invoeren tekst Tekstinvoer, voor wachtwoorden, enz., de volgende afstandsbedieningsknoppen gebruiken. / -knoppen (a): Elke keer dat u hierop drukt verandert het teken.
  • Page 222: Extra Informatie Voor De Functies Van De Speler

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Extra informatie voor de functies van de speler Extra informatie Door updates van de firmware (de software van het systeem) die u uitvoert na aankoop, of door firmware- veranderingen tijdens de productie van het product, kunnen er toevoegingen of veranderingen van de beschikbare...
  • Page 223: Geavanceerde Setup

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Geavanceerde instellingen Geavanceerde Setup Het toestel stelt u in staat geavanceerde instellingen te configureren om u een nog betere ervaring te laten beleven.
  • Page 224 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige 0 U kunt Wi-Fi-connectie-instellingen maken m.b.v. een web browser op een computer. "Invoeren tekst" ( P27). Na het beëindigen van de invoer, druk op ENTER. Voor details, raadpleeg "Web Setup"...
  • Page 225 "On" (Fabrieksinstelling), "Off" 1. Schakel het toestel in. 2. Druk op SETUP op de afstandsbediening, selecteer "Wi-Fi" in "Network Setting" - ∫ Balance Out (alleen N-70AE) "Connection" en selecteer daarna "Wi-Fi Setup". 3. Druk op om "Use iOS Device" te selecteren en druk op ENTER.
  • Page 226: Firmware-Update

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Firmware-update Firmware-update De bijwerkfunctie op dit toestel Hoe te updaten De firmware bijwerken via netwerk Dit toestel heeft een functie voor het updaten van de Er zijn twee methoden voor het updaten van de firmware: 0 Controleer of het apparaat is ingeschakeld en de firmware (de systeemsoftware) via het netwerk of de USB-...
  • Page 227 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Als een foutbericht wordt weergegeven: Wanneer zich van het USB-opslagapparaat met dit toestel. Dank u voor een fout voordoet, wordt "¢-¢¢ Error!" op het display van uw begrip.
  • Page 228: Problemen Oplossen

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Problemen oplossen Overige Alvorens de procedure te starten bediening is niet mogelijk zijn dat u daarna verbinding maakt met een andere SSID 0 Trek de stekker van het netsnoer uit het stopcontact, dan de SSID waarmee u verbinding wenst te maken.
  • Page 229 > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige ∫ Opslaan en wissen van de muziek op een 0 De DSD-audio kan niet digitaal uitgezonden worden. Kan geen toegang krijgen tot de netwerkserver 0 Dit toestel moet met dezelfde router verbonden worden USB HDD, die net dit toestel verbonden is...
  • Page 230 0 Om de audio vanaf een computer af te spelen, moet u de speciale driver op uw computer installeren. Download de driver-software van onze website. http://www.pioneer-audiovisual.eu/ 0 Als er meerdere applicaties op de computer werkzaam zijn, sluit dan de applicaties af die u niet gebruikt.
  • Page 231: Algemene Specificaties

    0 RCA OUT: 2,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 0,3 W (In Stand-by) 0 XLR OUT (N-70AE): 4,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 2,0 W (In Stand-by, Network Standby: On, Network Coaxiale Digitale Ingang Setting: Wired) 0 RCA-aansluiting, 0,5 Vp-p / 75 ≠...
  • Page 232: Licentie En Handelsm

    > Vóór het Starten > Namen van de onderdelen > Installeren > Initial Setup > Afspelen Extra informatie | Geavanceerde Setup | Overige Licentie en handelsm ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 233 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
  • Page 234 Ytterligare information | Avancerade inställningar | Övrigt Innan du börjar Vad som finns i förpackningen ..........2 NETWORK AUDIO PLAYER Delarnas namn N-70AE Frontpanel (N-70AE) .............. 3 Frontpanel (N-50AE) .............. 4 Bakpanel (N-70AE) ..............5 Bakpanel (N-50AE) ..............6 Fjärrkontroll ................7 N-50AE Display ..................
  • Page 235: Vad Som Finns I Förpackningen

    Innan du börjar ≥ Endast N-70AE Antenn för trådlöst (2) Huvudapparat (1) (N-70AE används i illustrationerna) 0 Snabbstartsguide (1) 0 Det här dokumentet är en onlinebruksanvisning. Den följer inte med som ett tillbehör. 0 Nätkabeln får inte anslutas innan alla andra kabelanslutningar har slutförts.
  • Page 236: Frontpanel (N-70Ae)

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Frontpanel (N-70AE) Delarnas namn             1. Í/I STANDBY/ON-knapp/indikator: Sätter på och stänger av huvudströmmen till kan också...
  • Page 237: Frontpanel (N-50Ae)

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Frontpanel (N-50AE) Delarnas namn           1. Í/I STANDBY/ON-knapp/indikator: Sätter på och stänger av huvudströmmen till kan också...
  • Page 238: Bakpanel (N-70Ae)

    5. AC IN: Anslut den medföljande nätkabeln. 6. CONTROL OUT-uttag: Om du ansluter förstärkare och cd-spelare av märket Pioneer, är centraliserad styrning möjlig. Till exempel kan du styra förstärkaren och cd-spelaren från Pioneer Remote App.
  • Page 239: Bakpanel (N-50Ae)

    5. AC IN: Anslut den medföljande nätkabeln. 6. CONTROL OUT-uttag: Om du ansluter förstärkare och cd-spelare av märket Pioneer, är centraliserad styrning möjlig. Till exempel kan du styra förstärkaren och cd-spelaren från Pioneer Remote App.
  • Page 240: Fjärrkontroll

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Fjärrkontroll 1. Í STANDBY/ON-knapp: När huvudströmmen till apparaten är på, sätter den här på apparaten eller sätter den i standbyläge. Det går inte att sätta på eller stänga av ...
  • Page 241: Display

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Display   USB Front Song  Artist Album   FLAC  44.1   00:01:45 / 00:03:23 L.R.A ASR D.OUT ...
  • Page 242: Anslutningar Till En Förstärkare

    Integrerad förstärkare, AV-receiver, etc. Ansluta med en analog ljudkabel Du kan spela ljudet från nätverksfunktioner, som en N-70AE används i illustrationerna. N-50AE har inte ett internetradio, och från enheter som är anslutna till den här XLR-uttag. Signalen konverteras till analog i den här apparatens D/A- apparaten genom högtalarsystem anslutna till integrerade...
  • Page 243 DIGITAL OUT OPTICAL-uttag. Styruttaget Om du till exempel ansluter förstärkare eller cd-spelare av märket Pioneer som har styruttag med hjälp av monominikontaktkablar (utan resistorer), kan du centralisera styrningen av enheterna med hjälp av Pioneer Remote App.
  • Page 244: Att Ansluta Nätkabeln, Etc

    När wifi-anslutningen görs, ska du göra inställningarna i grundinställningarna ( P12). När du använder N-70AE, ska du se till att du har anslutit den medföljande trådlösa antennen. ( P5) Du kan njuta av funktioner som internetradio och AirPlay genom att ansluta enheten till nätverket.
  • Page 245: Sätta På Strömmen Och Grundinställning

    STANDBY/ON-indikatorn i mitten av knappen långsamt blått, sedan visas "Hello" på BLUE BLINKING displayen omkring 20 sekunder senare. Därefter blir displayen blank och efter att Pioneer-logon visats, kan du börja använda apparaten. Wifi-anslutningsinställningar När du först sätter på strömmen, visas grundinställningsskärmen automatiskt, vilket gör att du...
  • Page 246 AIRPLAY SPEAKER..." på iOS-enhetens skärm och välj godkänna sekretesspolicyn för att kunna använda "Next". Chromecast built-in-funktionen. Välj "Accept" och tryck 0 Den här apparaten visas som "Pioneer N-70AE på ENTER för att visa att du godkänner den. Mer XXXXXX" eller "Pioneer N-50AE XXXXXX". Wireless information om vilka inställningar som krävs för att...
  • Page 247 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt 0 Om du valde "None", fortsätt till steg 3. Om du valde "WEP", "WPA", eller "WPA2", skriver du in lösenordet och bekräftar.
  • Page 248: Usb-Lagringsenhet/Hdd

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Usb-lagringsenhet/HDD Uppspelning Grundläggande åtgärder Du kan spela musikfiler genom att ansluta en usb- lagringsenhet eller en HDD (hårddisk) till USB-porten på apparatens framsida eller baksida.
  • Page 249 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt 0 Det finns stöd för att visa albumnamn, artistnamn och Det går inte att spela upp andra format som exFAT, NTFS 0 WMA Pro/Voice/WMA Lossless är format som inte stöds.
  • Page 250: Internetradio

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Internetradio Grundläggande åtgärder Du kan använda internetradiotjänster såsom TuneIn genom att ansluta den här enheten till ett närverk som har internetanslutning.
  • Page 251: Spotify

    "Devices Available" längst ned på skärmen. 4. Välj den här apparaten. 0 Den här apparaten visas som "Pioneer N-70AE XXXXXX" eller "Pioneer N-50AE XXXXXX". 5. Den här apparatens sätts på automatiskt och ingångsväljaren ändras till Network och streamningen av...
  • Page 252: Airplay

    Wi-Fi enheten i listan över enheter som visas. iPhone 0 Den här apparaten visas som "Pioneer N-70AE XXXXXX" eller "Pioneer N-50AE XXXXXX". Pioneer N-70AE XXXXXX 0 Om ett "AirPlay Password" har lagts in i den här apparaten, skriv in lösenordet du lagt in.
  • Page 253: Music Server

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Music Server ® Du går att streama musikfiler som lagrats på en dator eller 0 Beroende på versionen på Windows Media Player, kan NAS-enhet som är ansluten till samma nätverk som den här namnen på...
  • Page 254 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Kontrollera fjärrstyrd uppspelning från en 0 Filer med variabel bithastighet (VBR) stöds. Men LPCM (Linear PCM): uppspelningstiderna kanske inte visas korrekt. 0 Samplingsfrekvenser som stöds: 44,1 kHz, 48 kHz dator 0 Fjärruppspelning stödjer inte sömlös uppspelning.
  • Page 255: Användning Av En Dator För Att Spara Och Radera Musik På En Usb-Hdd Som Är Ansluten Till Den Här Apparaten

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Användning av en dator för att spara och radera musik på en usb-HDD som är ansluten till den här apparaten Grundläggande åtgärder porten på...
  • Page 256: Att Använda Den Här Apparaten Som En D/A-Omvandlare

    Du måste installera en särskild drivrutin på din dator för att spela upp ljud från den. Ladda ned drivrutinen från vår webbplats. http://www.pioneer-audiovisual.eu/ Anslutningar Använd en usb-kabel av A—B typ för att ansluta till en dator. För att ansluta ljudenheter, som cd-spelare, använder du antingen en digital optisk kabel eller en digital koaxialkabel beroende på...
  • Page 257 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt När du spelar upp från en enhet som är ansluten till DIGITAL IN OPTICAL-uttaget, trycker du på DIG IN 2 för att ändra ingången på...
  • Page 258: Att Justera Ljudkvaliteten

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Att justera ljudkvaliteten Att återge det ursprungliga ljudet 0 Den här funktionen kan inte användas när DIRECT-läget är på. verklighetstroget (DIRECT-läge) ∫...
  • Page 259: Skriva In Text

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Skriva in text Använd följande knappar på fjärrkontrollen för att mata in text, lösenord etc. / -knappar (a): Varje gång du trycker ändras tecknet. CLEAR-knapp (b): Raderar tecknet vid markörens position.
  • Page 260: Ytterligare Information Om Uppspelningsfunktioner

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Ytterligare information om uppspelningsfunktioner Ytterligare information På grund av uppdateringar av det fasta programmet (systemets program) efter det att du köpt produkten eller ändringar i programvaran under produktens tillverkning, kan det finnas tillägg till eller ändringar av tillgängliga funktioner jämfört med de som finns i bruksanvisningen.
  • Page 261: Avancerade Inställningar

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Avancerade inställningar Avancerade inställningar Enheten gör det möjligt för dig att konfigurera avancerade inställningar för att ge dig en ännu bättre erfarenhet.
  • Page 262 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt 0 Du kan göra wifi-inställningarna med en webbläsare på en dator. Mer information finns P26). Efter att du skrivit klart, trycker du på ENTER. under "Web Setup"...
  • Page 263 "On" (Standardvärde), "Off" ansluten trådlöst till routern. Du inte göra den här inställningen om den här apparaten är ansluten till routern med en ∫ Balance Out (endast N-70AE) Ethernet-kabel. 1. Sätt på apparaten. Du kan växla fasen för den här apparatens XLR ANALOG OUT-uttag så att den matchar 2.
  • Page 264: Uppdatering Av Den Fasta Programvaran

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Uppdatering av den fasta programvaran Uppdatering av den fasta programvaran Den här apparatens uppdateringsfunktion. Hur man uppdaterar Uppdatera firmware via nätverk Den här apparaten har en funktion för att kunna uppdatera Det finns två...
  • Page 265 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Om ett felmeddelande visas: När ett fel inträffar visas Firmwarefiler namnges på följande sätt: 7. Tryck på ENTER för att starta uppdateringen av den fasta "¢-¢¢...
  • Page 266: Felsökning

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Felsökning Övrigt Innan du startar proceduren vägguttaget och kontakta återförsäljaren eller vår enheten i närheten av mikrovågsugnar eller andra kundsupport. accesspunkter.
  • Page 267 ∫ Spara och radera musik på en usb-HDD webbplats. 0 Se till att routern och/eller modemet som används stöds http://www.pioneer-audiovisual.eu/ som är ansluten till den här apparaten via en av din internetleverantör. 0 Om det är flera program i gång på datorn, avslutar du de dator du inte använder.
  • Page 268: Allmänna Specifikationer

    0 RCA OUT: 2,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 0,3 W (I standby) 0 XLR OUT (N-70AE): 4,2 Vrms (1 kHz, 0 dB) / 500 ≠ 0 2,0 W (I standby, Network Standby: On, Network Setting: Koaxial digitalingång...
  • Page 269: Information Om Licens Och Varumärke

    > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Ytterligare information | Avancerade inställningar | Övrigt Information om licens och varumärke ® The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S.
  • Page 270 (Europe / Europe / Europa / Europa / Europa / Europa / Europa) © 2017 Onkyo & Pioneer Corporation. All rights reserved. © 2017 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1712-1 http://pioneer-audiovisual.com/privacy/ “Pioneer” is a trademark of Pioneer Corporation, and is used under license.

Ce manuel est également adapté pour:

N-50ae

Table des Matières