Intended Use; Before Each Ride - SR Suntour AXON werx ELD 15 Mode D'emploi

SR SUNTOUR - OWNERS MANUAL

INTENDED USE

Category
AXON werx ELD 15
AXON werx ELD
Make sure to select the correct fork according to your frames build in height and per-
sonal riding style. Please note that the AXON, EPICON and RAIDON air series forks were
not designed for jumping, dropping, aggressive downhill riding, freeriding or urban
style riding. Not following these instructions could result into a failure of the product,
accident and even death of the rider. Not following these instructions will void the
fork's warranty!

BEFORE EACH RIDE!

Do not ride your bike, if one of the following test criteria can't be passed!
Riding your bike without eliminating any defect or carrying out the neces-
sary adjustments can result into an accident, fatal injury or even death.
►Do you notice any cracks, dents, bent or tar-
nished parts at your suspension fork or any
other part of your bicycle? If so, please con-
sult a trained and qualified bicycle mechanic
to check your fork or bike.
►Can you notice any oil leaking out your fork?
Also check out hidden areas like the bottom
side of your fork crown. If so, please consult
a trained and qualified bicycle mechanic to
check your fork or bike.
►Compress your fork with your body weight. If
it feels too soft, relating to the proper pressu-
re to achieve an accurate SAG, inflate it until
you have reached the required value. Please
also refer to chapter " SETTING SAG"
►Make sure your brakes are properly installed/
adjusted and work appropriate. This also
applies to every other part of your bike like
handlebars, pedals, crank arms, seat post,
saddle etc. Also refer to the owner's manuals
provided by all other component manufac-
turers.
Marathon Cross Country All Mountain
►Make sure your wheels are centered perfect-
ly in order to avoid any contact with your
suspension fork or brake system.
►If you are using a quick release system to fas-
ten your wheel set, make sure that all levers
and nuts are adjusted properly. In case you
are using a through axle system, make sure
that all fixing bolts are tightened with the
appropriate torque values.
►Check the cable length and routing of your
components. Make sure they do not interfe-
re your steering actions.
►If you are using reflectors for on-road cyc-
ling, make sure they are clean and properly
installed.
►Bounce your bike slightly on the ground
while looking and listening for anything
which might be loose.
AXON werx ELD
5
English