SR Suntour AXON werx ELD 15 Mode D'emploi page 12

SR SUNTOUR - OWNERS MANUAL
Insert the expander nut into the groove
which is on top top of the controller unit.
Grease the O-rings and insert the control-
ler unit and expander nut into the steerer
tube.
Fasten the expander with 10 - 12Nm.
Afterwards you can install the fork into
your bike. Fasten the A-head top cap until
you do not feel any play within the head
set.
Tape off the protection film and install the
lock out knob on your handlebar.
Use some pressure to press it onto the
handlebar.
Secure the lock out knob with two zip
ties.
6mm
12Nm
AXON werx ELD
11
English