Qloc Hub Requirements; Fork Maintenance - SR Suntour AXON werx ELD 15 Mode D'emploi

SR SUNTOUR - OWNERS MANUAL

Qloc hub requirements

According to function of our Qloc system there are some requirements hub's have to fullfil to
make this system work smoothly. Please find the explanation down below:

FORK MAINTENANCE

SR SUNTOUR forks are designed to be nearly maintenance free. However, as long as moving parts
are exposed to moisture and contamination, the performance of your fork might be reduced after
several rides. To maintain a high performance, safety and a long life of your fork, a periodic main-
tenance is required.
Please keep in mind that a fork which has not been serviced in accordance with
the maintenance instructions will loose its warranty!
Never use a pressure washer or any water under pressure to clean your fork as
water may enter the fork at the dust seal level.
We recommend that your fork is being serviced more fequently as indicated
below if you ride in extreme weather (winter time) and terrain conditions.
Any case you may feel that your forks performance has changed or handles diffe-
rently immediately call on your local dealer to inspect your fork.
FORK MAINTENANCE
Maintenance Schedule
clean stanchion tubes and dust
seals
inspect upper tubes for
scratches
check main fixing bolts for
proper torque (Nm)
18
English
Non-Recommend Shape
Limited Function
Edges within the hub can
cause the axle to get stuck
after each ride every 25h every 50h
AXON werx ELD
Recommend Shape
Full Function
No Edges
every 100h