Enarco TEN2540 Manuel D'instructions page 44

•
en
12 TEN2540-TEN2550-TEN3040-TEN3050
To move the machines along the ground:
o
Secure the guide pole with its anchor device. Place the wheel unit accessory
BS2549 on the front of the machine, with the fastening latches open, facing the
anchor points.
o
Place the two fastening latches so that the wheel unit is firmly anchored to the
machine.
Tilt the machine forward using the handle and with your foot on the central bar of
o
the wheel unit (A) and move the tray (B).
(A)
W
!
When you let the machine go, do so gently, keeping your foot on the central bar to
keep your balance and so as not to damage the plate (C).
(B)
REVERSIBLE PLATE COMPACTORS
(C)