Standard Fittings; Optional Accessories; Applications - Everflo EF 1200 Instructions Pour L'assemblage

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

• The packaging elements (plastic bags, staples, etc.) must not be left within reach of children as they represent

potential hazard sources.

• Packaging components must be disposed of according to the regulations in force in the country where the

machine in which the motor pump is integrated has been manufactured.

Plastic packaging must not be discarded in the environment.

• After unpacking the motor pump, make sure no parts are missing, all parts are in perfect condition and the

identification plate is in place and legible.

In case of any doubt, do not install the motor pump, but contact the Manufacturer.

• This manual must always accompany the machine in which the motor pump is integrated and made available

to the end user.

Make sure the purchased product consists of the following elements:

• motor pump;

• use and maintenance manual;

• declaration of incorporation.

In case of problems, contact the Manufacturer.

The standard motor pump equipment can be integrated with the following range of accessories:

• battery connection cable, including ON/OFF switch;

• suction and delivery fittings.

WARNING

• The Skilled Technician must abide by the installation instructions in this manual.

• The machine in which the motor pump is integrated must be made in such a way as to ensure

conformity with the safety requirements indicated in the European Directives. This fact is guaranteed

markings and by the Declaration of Conformity of the Manufacturer of the machine in which

the motor pump is integrated.

• The motor pump can be installed in any position, however, when installing vertically maintain the head

pointing downwards in order to prevent liquid entering the electric motor in the event of leakage.

• The motor pump must be stably fastened, without pressing excessively on the rubber feet, as these act as

dampers and help to reduce noise and vibrations.

For the main formats used in the installation, refer to Fig. 6 and 7.

WARNING

• The motor pump must operate without exceeding the pressure limits as shown on the identification plate (4).

The pump applications must be made following good mechanical engineering practices. The Manufacturer's