Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
POWER CONNECTION
Mains power
Max. input power
Max. input
Protection fuse
HYDRAULIC CONNECTION
Max. water supply temperature
Min. water supply temperature
Min. water supply flow rate
Max. water supply pressure
Max. priming depth
PERFORMANCE
Max. flow rate
Flow rate at max. pressure
Max. pressure
Max. level of sound pressure - uncertainty
WEIGHT
The Manufacturer reserves the right to make all changes to the motor pump deemed necessary.
Refer to Figures from 1 to 5 at the beginning of the manual.
WARNING
• Should the identification plate deteriorate during use, contact the Manufacturer or a Skilled Technician to
have it restored.
The identification plate (4) shows the motor pump model, the serial number, the year of manufacture and
the main electrical and mechanical specifications (max. flow rate, max. pressure, power supply voltage,
input, etc.). It is located on the motor pump casing.
a) Pressure switch.
This device, suitably calibrated by the Manufacturer, limits the maximum operating pressure, preventing
hazardous pressure levels, when the delivery is closed or when trying to set pressure values above the
24
maximum permitted ones.
Specifications and details are approximate.
IDENTIFICATION OF COMPONENTS
1. Suction
2. Delivery
3. Feet
MOTOR PUMP IDENTIFICATION PLATE
SAFETY DEVICES
EF 5500
12V
12 V
(W)
202
(A)
16,8
(A)
20
(°C - °F)
(°C - °F)
(l/min - USgpm)
(bar - psi)
(m - ft)
(l/min - USgpm)
(l/min - USgpm)
(bar - psi)
(dB(A))
(kg - lb)
4. Identification plate
5. Fuse holder cover
6. Power connector
EF 5500
EF 7000
24V
12V
24 V
12 V
180
240
7,5
20
15
25
60 - 140
5 - 41
28,4 - 7,5
37,1 - 9,8
1,0 - 15
2,5 - 8,0
20,8 - 5,5
26,5 - 7,0
15,2 - 4,0
19,7 - 5,2
4,1 - 59
73 - 0,8
2,5 - 5,6
EF 7000
24V
24 V
228
9,5
15
3,0 - 9,0
4,3 - 9,5
Publicité
Table des Matières
