Special Maintenance; Dismantling And Disposal - Everflo EF 1200 Instructions Pour L'assemblage

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

MAINTENANCE SCHEDULE

After every use.

Every 50 hours.

(1)

Checks must be made more frequently if the motor pump operates where there are strong vibrations

WARNING

• Special maintenance jobs must only be performed by a Skilled Technician.

Perform the special maintenance jobs shown in the manual of the machine in which the motor pump

is integrated; unless otherwise indicated, in relation to the motor pump, remember the following:

MAINTENANCE SCHEDULE

At the end of the season or once a year.

CAUTION

• The data shown on the chart are approximate. More frequent jobs may be necessary in case of particularly

heavy-duty use.

Only qualified persons must be allowed to dismantle the motor pump and this operation must be performed

in compliance with the laws applicable in the country where the machine in which it is integrated has

been installed.

WARNING

• Before scrapping the motor pump, make it unusable, for example by cutting the power cable and make

harmless those parts that could be hazardous for children playing with the motor pump.

WARNING

• Also follow the instructions contained in the manual of the machine in which the motor pump is

integrated.

• Before doing any jobs, perform the operations described in the

In the event of not being able to restore the correct operation of the motor pump with the aid of the information

contained on the following table, contact a Skilled Technician.

• Check and if necessary clean the suction filter.

• Check any power cable, high-pressure pipes and clamp

tightness.

In the event of one or more parts being damaged, do not use

the machine and contact a Skilled Technician.

• Check the integrity of the suction circuit.

• Check the fastening of the motor pump to the structure of the

machine in which it is integrated.

In the event of such fastening being unstable, do not use the

machine and contact a Skilled Technician