Faber Dama Isola Mode D'emploi page 6

This rangehood can be installed as either ducted or ductless.
either side of the lower chimney. Ductless installations require a Ductless Conversion Kit, available from your dealer.
WARNING! BEFORE MAKING ANY CUTS OR HOLES FOR INSTALLATION, DETERMINE WHICH VENTING METHOD WILL
BE USED AND CAREFULLY CALCULATE ALL MEASUREMENTS.
(not vented to the outside)
The ductless Dama Isola chimney is
adjustable for varying ceiling heights as
indicated in FIGURE 6. The chimney can be
adjusted for ceilings between 8' 3/4" and 9'
1 3/4" depending on the distance between
the bottom of the hood and the cooktop
(distance x in FIGURE 6).
For higher ceiling installations, the High
Ceiling Chimney Kit includes an additional
support structure which adds 21" to the
various ceiling heights in FIGURE 6.
PLAN THE INSTALLATION
DUCTLESS
INSTALLATION DIMENSIONS
upper
chimney
cover
ductless
lower
3
1/2"
chimney
cover
12
1/2"
canopy
x = distance from hood to cooktop
(varies depending on installation)
min - 24", suggested max - 30"
also consult cooktop
manufacturer's recommendation
cabinet base
When installed ductless, the rangehood vents out of grates on
8 min
3/8"
15 max
3/8"
23
5/8"
4
3/4"
x = 24"
x min
8'
3/4"
max
8'
7 3/4"
36"
FIGURE 6
DUCTLESS
DIMENSIONS
min & max ceiling height examples
x = 26" x = 28"
min min
8' 8'
2 3/4" 4 3/4"
max max
8' 8'
9 3/4" 11 3/4"
WARNING
DUE TO THE SIZE
AND WEIGHT OF THIS
RANGEHOOD, THE
SUPPORT MUST BE
FIRMLY ATTACHED TO
THE CEILING. For plaster
or sheet rock ceilings, the
support must be attached
to the joists. If this is
not possible, a support
structure must be built
behind the plaster or sheet
rock. The manufacturer
assumes no responsibility
for injury or damage caused
by improper installations.
x = 30"
min
8'
6 3/4"
max
9'
1 3/4"
!