Shizuoka Seiki Co. VAL6 GN5 Manuel D'instructions page 4

Important Manual Information
• Intended use is the temporary heating of buildings or structures under construction, alteration or repair.
• The installation shall conform with local codes or, in the absence of local codes, with the National Fuel Gas Code
ANSI Z223.1/NFPA 54 and the National Gas and Propane Installation Code, CSA B149.1.
• The installation must conform with local codes or in the absence of local codes, with the Standard for the Storage
and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58 and the Natural Gas and Propane Installation Code,
CSA B149.1.
Shizuoka Seiki is constantly striving to improve product design and quality. Therefore, although this manual
contains the most current product information available at the time of printing, there may be minor discrepancies
between your heater and this manual. If you have any questions concerning this manual, please consult your
Shizuoka Seiki dealer.
POINT:
• This Manual aims to supply the user with detailed information on how to properly use, operate and service
this VAL6 Heater.
• The VAL6 GN5, VAL6 GP5, and the standard equipment are used as the basis for explanations, pictures,
and illustrations in this manual.
VAL6 GN5, VAL6 GP5
Owner's Manual
©2013 by Shizuoka Seiki Co., Ltd.
nd
2 edition, May 2014
All rights reserved. Any reprinting or
unauthorized use without the written permission
of Shizuoka Seiki Co., Ltd. is expressly
prohibited.
Printed in Japan
Parts Number 51001-200004A