2 Control Panel Overview - LG LRE6327ST Manuel Du Propriétaire

12
OvERviEW
CONTROL PANEL OvERvIEw
Cooktop Element Control
NOtE
Cooktop Element Controls are set up in the same order as the
corresponding elements.
HS (Hot Surface) Indicator
The HS indicator will appear in the display once the element is turned off or during the self clean cycle. The HS indicator will
stay on until the surface has cooled to approximately 150˚F/66˚C or when the self clean cycle ends.
PF (Power Failure) / Flashing Time
Depending on the model of your range, the display will either show "PF" or a flashing clock. This means that the product
has just been plugged in, or that it has experienced a power interruption. To clear the "PF" message, press the "On/Off" key
on the cooktop controls and the "Clear/Off" key on the oven controls. If your oven displays a flashing clock, then press the
"Clock" key and reset the time, or press any key to stop flashing.
Features
Warm Heater
Dual Elements
Oven Controls
Number Buttons
Warming Drawer
Single Elements
Button
Start/Lockout
Button
Clear Off
Button