Disclaimers - Enconnex AC6000 Mode D'emploi

Contact Enconnex agent for service, recycling, and disposal instructions. Also visit
●
earth911.com for instructions on disposal.
Damage will occur if the input or output AC terminals are shorted. Enconnex is not
●
responsible for damages to the UPS incurred in this manner.
Install this UPS in a clean, temperature- and humidity-controlled indoor location in order to
●
reduce the risk of fire or electric shock. Ambient temperature must not be above 40°C
(104°F) or below 0°C (32°F). Do not locate near water or excessive humidity (95%
maximum).
It is advisable to not bring superfluous conductors into the installation area. Before
●
beginning maintenance or installation, please remove jewelry (e.g. watches, rings and
necklaces). Metal conductors have the potential to short between power terminals (power
and ground, commonly) and nearly instantly heat to very high temperatures when
connected between them. This can cause serious burns and/or weld a metal object to the
terminals.
This system is cooled through forced air convection. Do not block air flow of fans and
●
allow adequate space on the front and rear of the unit for proper ventilation.
This equipment has been tested and found to comply with the limits for a Class-A digital
●
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference that the user must correct, including
the expense of all corrective modifications.
This system is suitable for IT (impedance-grounded) systems.
●
1.2

Disclaimers

Modification or changes to the AC6000 not performed or expressly approved by Enconnex
may void the unit's warranty.
The integral battery is not field-replaceable. There are no user-replaceable fuses within.
Contact Enconnex Customer Support for assistance.
The AC6000 is designed for installation in temperature-controlled, indoor areas free of
conductive contaminants. See Technical Specifications for more information.
​ - CAUTION
8