Enconnex AC6000 Mode D'emploi page 31

UPS Configuration Auto Output
Output Voltage
Level
RS232
Baudrate
Output
Frequency
Auto Start
Prevent REPO
Shutdown
Diagnostic test
schedule
Min. SOC
Threshold
Max. UPS
Power
Supplement
Rack Power
Threshold
True True, False
208V 208V, 230V,
240V
9600 9600, 19200,
38400,
57600,
115200
60 Hz 50 Hz, 60 Hz
True False, True
False False, True
8 Days 1-30 Days
70% 30%, 40%,
50%, 60%,
70%, 80%,
90%
1.0 KW 0.5 KW, 1.0
KW, 1.5 KW,
2.0 KW, 2.5
KW, 3.0 KW
6 KW 0 KW, 1 KW,
2 KW, 3 KW,
4 KW, 5 KW,
6 KW
Automatically determines
input Voltage and Frequency
to use during UPS mode.
Sets the output voltage level
if Auto Output is false.
Sets the RS232 baudrate.
Sets the output frequency if
Auto Output is False.
Enables or disables the
auto-start feature of the
AC6000. Once initialized, the
unit will automatically return
to online mode after a power
failure unless the user
initiates a power off.
Allows hardware REPO
switches to trigger shutdown
if unchecked and prevents
shutdown if checked.
Performs a diagnostic test on
the power electronics every
1-30 days. (Intended for
Technician use only)
Sets the battery state of
charge threshold where peak
shaving is no longer
available.
Maximum amount of power
the AC6000 supplies during
peak shave.
Sets the threshold of power
that the server rack pulls
through the AC6000 before
peak shaving is enabled.
31