2. Product Introduction
2.1
Overview
The Enconnex AC6000 is a highly integrated line-interactive uninterruptible power system
(UPS). I ntegrating the electronics and a battery capable of supplying 6kWs of power for 6
minutes contained within a small 2RU form factor, this system is designed to protect
servers in the back office and data center environments.
Figure 2.1-1: AC6000 Drawing
The line-interactive approach captures the best features of UPS topologies: Its electronics
are mostly inactive, but always "armed". They're at the ready for the next power
interruption. Switchover to UPS Mode occurs within ¼ to ½ cycle of the 60 Hz mains.
This translates to full power available with an interruption of 4 to 8 thousandths of a
second. Most, if not all, IT equipment is designed to never notice this very high-speed
handoff.
Figure 2.1-2: AC6000 System Overview
10