Instructions For Use; Blow Function - Nilfisk Action Plus Mode D'emploi

E

Instructions for use

n
g Before using the machine make sure
that the voltage shown on the rating
l
plate underneath the machine cor-
i
responds with the mains voltage. The
machine is supplied with dust bag,
s
prefilter and HEPA filter.
h
Start and stop
Start
Pull out the cord and plug the machine
to a wall socket.
Press the On/off button.
Stop
Turn off the machine and unplug.
Unplug by grasping the plug, not by
pulling on the cord.
8
1
Connecting hose, tube and nozzles
1. Insert the hose connector into the
suction inlet.
2. Connect the bent tube to the tube.
3. Connect the tube to the nozzle.
4. The tube is telescopic and can be
adjusted to your height. Push the
adjusting button to extend the tube,
and pull back to shorten, to desired
length.
2

Blow function

1. Open the lid (exhaust grill 23) on
the back of the machine.
2. Insert the hose connector into the
blow outlet.