Nilfisk Action Plus Mode D'emploi page 10

E
Changing the HEPA filter
5
n
The HEPA filter cleans the exhaust air
g
from micro particles the dust bag can
not keep. The HEPA filter can not be
l
brushed or washed clean.
i
1. Open the lid on the machine in the
back.
s
2. Remove the blow function lid.
h
3. Take out the HEPA filter.
4. Insert the new HEPA filter. Check
that the HEPA filter is correctly fit-
ted.
5. Put the blow function lid back.
6. Put the lid back and close.
10
Adjust the suction power
Sliding valve on the bent tube
The suction power is maximal with the
sliding valve closed and minimal when
all open. Adjust the suction power by
putting the sliding valve in the desired
position.
Power regulation
The suction power is adjusted with the
power regulator wheel in the back of
the machine.
6
Parking the tube and nozzle
There are two grooves for parking.
One located on the underside to use
when machine stands on the back,
and the other on the back to use when
the machine is standing on its wheels.