Nilfisk Action Plus Mode D'emploi page 9

Change of dust bag and filters
The size and quality of the dust bag
and filters affect the machine efficien-
cy. Use of non original dust bags or
non original filters can cause restricted
air flow which may lead to machine
overload. Using non-original dust bag
or filters will void the warranty.
Changing the dust bag
3
The dust bag indicator turns com-
pletely red when the dust bag needs
to be changed.
Always use original dust bags.
1. Release the hose connection from
the suction inlet.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard flap.
4. Remove the dust bag.
5. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
6. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fitted.
7. Close the lid.
8. Insert the hose connection into the
suction inlet.
4 Changing the prefilter
The prefilter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the prefilter
with every fifth dust bag. The prefilter
is located behind the dust bag. Always
use original filters.
1. Release the hose connection from
the suction inlet.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard flap.
4. Remove the dust bag.
5. Take out the filter holder with prefil-
ter.
6. Open the filter holder.
7. Take out the prefilter.
8. Fit the new prefilter. Check that
the prefilter is correctly fitted in the
holder.
9. Put the filter holder into the track
and push in place.
10. Insert the new dust bag by guiding
the cardboard into the track and
push it down.
11. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fitted.
12. Close the lid.
13. Insert the hose connection into the
suction inlet.
E
n
g
l
i
s
h
9