Trouble Shooting; Service And Maintenance Etc - Nilfisk Action Plus Mode D'emploi

E

Trouble shooting

n
g Repair or service of electrical com-
ponents such as cord or motor, must
l
only be carried out by an authorized
i
service center.
s
If the machine
does not start
h
Reduced suc-
tion power
If the machine
stops
12
Check that the plug
is correctly fitted to
the wall socket.
A fuse in the
building may have
blown and needs to
be changed.
The cord or plug
may be dam-
aged and must
be repaired by an
authorized service
center.
The dust bag may
be full and needs
to be changed, see
instructions.
The prefilter,
HEPA filter can be
blocked and have
to be changed, see
instructions.
The bent tube,
hose, tube or noz-
zle may be blocked
and needs to be
cleaned.
The thermal fuse
may have blown,
see instructions.
Service and maintenance
• Store the machine indoors and in a
dry environment.
• Change the prefilter with every fifth
dust bag. The dust bag package
includes five dust bags and one
prefilter.
• Clean the machine surface with
a dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
local dealer.
• Service – contact your local dealer.
Recycling and scrapping
Recycle the wrapping and scrap the
machine according to recommenda-
tions from the local authorities.
Cut the cord as short as possible to
avoid someone getting injured on the
scrapped machine.
Environmental commitment
This machine is designed with the
environment in mind. All plastic parts
due marked for recycling.
Responsibility
Nilfisk disclaim all responsibility for all
damage caused by incorrect use or
modification of the machine.
Guarantee
The warranty can vary between dif-
ferent countries. Contact your local
dealer for information.