INSTALLING THE DISCS
Installing the r_ever_sible shr_edding disc
Insert the liner into the attachment
1
assembly so that the feed tubes line
up and the liner lies flat.
Disc adapter_
Hold the reversible shredding disc
3
by the 2 finger grips with the desired
shredding side facing UP . Install the disc
on the disc adapter by fitting the adapter
through the hole in the bottom of the
disc until it is seated against the liner.
Installing the julienne disc
Insert the liner into the attachment
1
assembly so that the feed tubes line
up and the liner lies flat.
8
Finger_ gr_ip
Disc adapter_
Dr_ive pin
Slide the disc adapter onto the drive pin.
2
Install the lid by turning counter
4
clockwise, being sure it locks into place.
Disc adapter_
Dr_ive pin
Slide the disc adapter onto the drive pin.
2