Heatsail BEEM Manuel D'utilisation page 13

S T E P 1
Open the box carefully.
Place the box on a flat surface and
carefully remove the lid.
S T E P 2
Remove all parts from the box.
Never lift the BEEM by the cable.
S T E P 3 a
Use the bracket to draw the
holes and drill the holes where
the bracket has to be mounted.
8 universal anchors are included
(bore diameter 8 mm).
NOTE: We have provided anchors
and screws. If the supplied
hardware is not suitable for your
mounting surface, please contact
your local hardware supplier.
Manual
EN
13