System Configurations; Pump Description - Ultraflex UP 20 F Manuel D'installation Et D'entretien

ULTRAFLEX

1.3 System configurations

The pump UP20 can be installed in a single or double steering system and used with different types of
configurations of front, side or inboard cylinders.
WARNING
The pumps model UP20 can be installed in a single or double steering system and used with cylinders
UC68, UC69, UC94.
WARNING
Always connect the hoses correctly as indicated in the installation and maintenance manuals of the
corresponding hydraulic cylinders.

1.4 Pump description

The pumps UP20 F and UP20 T have been designed and manufactured to be used as a component in the
hydraulic steering systems, as described in the previous paragraph. The pump UP20 F must be installed on
the front part of the boat dashboard or semi-built-in through flange X74 (supplied separately); the pump
UP20 T must be assembled by means of tilt X52 (supplied separately). The following pictures show the main
pump components:
1
Pump UP20 F
2
Vented tank plug
3
Steering wheel connection shaft
4
Connections to the cylinder
UP20 F
2
3
UP20 T
2
page 8
of 71 -
PUMP FOR HYDRAULIC SYSTEMS
1
7
8
Installation and maintenance manual
Connections to the additional stations
5
6
M8 dowels for fixing the pump to the dashboard
7
Pump UP20 T
8
Connection shaft to tilt X52
5
4
5
5
4
5
4
6
4