Canister Type Fisheye Camera Installation - Urmet FISHEYE Serie Guide Rapide

CANISTER TYPE FISHEYE CAMERA INSTALLATION

1. Separate the camera body from the pedestal by turning it anticlockwise.
2. Pass the camera wire through the hole in the pedestal or alternatively in the side groove
according to the installation type.
3. Adjust the camera angle by turning the pedestal.
4. Drill the holes and insert the three anchor bolts and fix the pedestal by means of the
three fastening screws.
5. Finally fix the camera body to the pedestal by turning it clockwise.
Anchor
Fastenin
screw
23
EN