Installation Specifications - Urmet 1096/406 Guide Rapide

Masquer les pouces Voir aussi pour 1096/406:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Precautions
• Make sure that the device is intact after removing it from the package.
• Disconnect the device from the mains before cleaning or maintenance. Do not use
spray products to clean the device.
• Check that the working temperature is within the indicated range and that the
environment is not particularly humid.
• If installed in outdoor, don't expose it to direct rain or high temperatures.
• Disconnect power by means of the circuit breaker in the event of a failure and/or bad
operation.
• The device can only be opened by qualified technical personnel.
• Exclusively contact an authorised service centre for repairs.

Installation specifications

• Avoid pointing the lens directly towards the sun or intense sources of light also when
the camera is off. The subject must not be backlight.
• Do not point the camera towards reflecting objects.
• Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
• Arrange a suitable circuit breaker and fuse upstream of the devices.
• Make sure that the rating plate data correspond to the power specifications before
connecting the device to the mains.
DS1096-116C
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1096/4071096/5061096/507

Table des Matières