Urmet 1096/406 Guide Rapide page 10

EN
Zoom movement and focus adjustment of the cameras
The cameras have an Autofocus lens that adjusts the focus of the image autonomously.
It is also possible to move the zoom and manually adjust the focus through the UTC/PTZ
interface of the HVR devices in the Urmet catalogue. The zoom can be moved and the focus can
be adjusted using the arrow keys of the HVR remote control graphic interface. The zoom is
adjusted using the UP and DOWN arrows; the focus is adjusted using the RIGHT and LEFT
arrows.
Operations on the optics are also possible using the joystick on the camera cable.
UP
ZOOM +
THE CENTRAL BUTTON CAN BE
USED TO RESET THE
LEFT
RIGHT
AUTOFOCUS
FOCUS
FOCUS -
+
DOWN
ZOOM -
Accessing the camera OSD menu
Using the UTC interface, through the use of the HVR devices in the Urmet catalogue, the OSD
menu of the cameras can be accessed by pressing the central button of the graphic interface of
the HVR remote control and then scrolling through the menus using the arrow buttons.
Refer to the respective product manuals for using the controls.
For using the 1080P and 1080N series HVRs, refer to the complete manual of these cameras
which can be downloaded from Urmet website (see below).
DS1096-116C 10