Urmet FISHEYE Serie Guide Rapide page 21

EN
Firmware upgrade
Contact Customer Service Technical Assistance URMET S.p.a. in order to check
availability of firmware upgrades.
Network configuration
Camera default setting is DHCP mode. If the network does not support dynamic
addressing (DHCP), the device will automatically switch to factory IP 192.168.1.168. Use
Urmet "Device Config. Tool" software provided with IP Camera CD in order to modify the
IP address and other network settings to prevent any conflict with other devices on the
network.
Network connections
When connecting a PC (using Software Client or Browser), any video channel on the PC
will be using "unicast" connection (TCP, RTP, UDP).
The device can support up to 10 "unicast" connections so it is possible to show the video
on maximum 10 remote devices (PC or smartphone) at the same time depending on the
available network band.
21