Maytag MVW6200KW Guide De Démarrage Rapide

OPERATING INSTRUCTIONS
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury
to persons, read the IMPORTANT SAFETY INSTRUCTIONS,
located in your appliance's Owner's Manual, before operating
this appliance.
STEP 1. SORT & STEP 2. ADD HE DETERGENT &
LOAD LAUNDRY LAUNDRY PRODUCTS TO
DISPENSERS*
See Loading
Recommendation
section below.
STEP 3. PRESS STEP 4. SELECT THE DESIRED
POWER BUTTON CYCLE FOR YOUR LOAD*
TO TURN ON THE
WASHER
STEP 5. ADJUST STEP 6. SELECT ADDITIONAL
CYCLE SETTINGS, OPTIONS*
IF DESIRED
STEP 7. PRESS,
HOLD, AND RELEASE
HOLD TO START
BUTTON TO BEGIN
CYCLE
*NOTE: Not all cycles, settings or options are available
with all models.
QUICK START GUIDE
MAYTAG TOP LOADING WASHING MACHINE
®
CONTROL PANEL AND FEATURES
Appearance may vary depending on model.
1 POWER
Press "POWER" button to turn on/off or to stop/cancel a cycle.
2 CYCLE KNOB
Turn knob to select desired cycle. See "Cycle Guide" online for
detailed cycle descriptions.
3 HOLD TO START BUTTON
Press, hold, and release the "Hold to Start" button to start cycle.
Press during a cycle to pause cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
4 CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP
Press "Temp" button to modify the cycle's available temperatures
(Tap Cold, Cold, Cool, Warm, Hot).
TAP COLD
Remove inside
Pressing the "Temp" button will toggle through available
tray for powder
temperature options. When no lights in the temperature column
HE detergent.
are illuminated the selected temperature is "Tap Cold".
RINSE OPTIONS
Follow Press "Options" button to modify the cycle to add Fabric Softener
and/or Extra Rinse.
manufacturer's
FABRIC SOFTENER
instructions to
determine Press "Options" button until LED next to Fabric Softener is
illuminated to let the machine know when you have added fabric
amount of
laundry softener to the appropriate dispenser.
products EXTRA RINSE
Press "Options" button until LED next to Extra Rinse is
to use.
illuminated to add a deep rinse after your main rinse has
completed. Available on most cycles. To run a "Rinse & Spin"
cycle, select the "Drain & Spin" cycle and turn on "Extra Rinse"
option.
LOADING RECOMMENDATION
For best performance, it is recommended
to load items by dropping them in loose
heaps evenly around the washplate and
agitator. Do not lay items length-wise
around the washplate or agitator.
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner's Manual
included with your machine.
For information on any of the following items, the full cycle guide, detailed product dimensions, or for complete instructions for use and
installation, please visit https://www.maytag.com/owners, or in Canada https://www.maytag.ca/owners. This may save you the cost of a
service call.
/™ ©2020 Maytag. All rights reserved. Used under license in Canada.
®
MORE WATER WHEN YOU WANT IT
Wash System with Deep Fill Wash Model
AUTO SENSING & DEEP FILL
■ The washer will adjust the water level to the
optimal amount for a High Efficiency wash
of the detected load size.
■ Press "Deep Fill" button to add more water
to the wash load.
■ There are three levels of deep water "Auto",
"Medium", and "High".
■ Not all levels available on all cycles.
ONLINE ORDERING INFORMATION
REGISTER MANUALS &
PRODUCT
DOWNLOADS
ADD SERVICE SCHEDULE SERVICE
PLAN
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
4
2
DEEP FILL
Press to add more water to the washer from the cycle's auto
sensed level (Auto, Medium, High).
AUTO OPTION
Pressing the "Deep Fill" button will toggle through available
water level options. When no lights are in the column are
illuminated the selected water level is "Auto". Auto adjusts the
water level for each load based on load size to provide efficient
cleaning.
TEMP
"Hot" option selected
When no lights in the
temperature column are
illuminated the selected
temperature is "Tap Cold"
CLEANING WITH LESS WATER
High
Medium
Auto
As the washer dampens and moves the
load, the level of the items will settle in the
basket.
This is normal, and does not indicate that
more items should be added.
IMPORTANT: You will not see a washer
basket full of water as with your past
agitator-style washer. It is normal for some
of the load to be above the water line.
TROUBLESHOOTING REPLACEMENT
PARTS
& FAQ
FILTERS REBATE & PROMOS
Canada:
1–800–688–2002
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
1
3
DEEP FILL
"High" option selected
When no lights are
in the column are
illuminated the selected
water level is "Auto".
High
Medium
Auto
04/20