Components; General; Visual Perception - Dibo 1D CPU-S Mode D'emploi

1 Pressure gauge
2 high pressure pump
3 softstarter
4 cabinet main switch
5 strainer
6 pressure regulating valve
7 electric motor
1 main switch
2 manometer

Components

GENERAL

Irrespective of the type of high pressure cleaner the cleaner exists from a range
of characteristic machine components which are shown below. Thus each
cleaner have its own maximum pressure and maximum flow. These you can
retrieve in the technical data of the machine.

VISUAL PERCEPTION

The water inlet on the float chamber is, in a standard way, equipped with a
strainer (bulky waste filter). The water can be cleaned by means of an extra
water filter in order to keep also finer dust particles away from the supplying
pipe. The unit is equipped with a pressure regulating valve and this is adjusted
by DiBO. See "Technical data" on page 23 .for the appllcable pressure.
1
2
5
3
4
DiBO 15
C O M P O N E N T S
6
7
2
1
E N